Products > Test Equipment

Help, how can I calibrate AC current

<< < (4/4)

daisizhou:
I have read this manual.As described in the manual, I have completed the calibration of the DC section,So I tried using a 19V small transformer with 220V AC input and 19V AC output.I use this 19V AC voltage and test it on a 19 ohm non-inductive resistor.
I found that the current at this time is inconsistent with Fluke8060a,So I suspect that the communication part is malfunctioning.
So I hope to test the AC current again

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod