Products > Test Equipment
Help restore SDS1102CML+ after unsuccessful flashing
AlexZ:
Hello everybody! There is an oscilloscope SIGLENT SDS1152CML When turned on, it hangs on the LOGO, connected the J11 connector , in the terminal it gives everything exactly the same as huxfluxdeluxe can not mount a USB flash drive. When loading the device, the USB flash drive is read, but then I can't find it when the KERNEL is loaded |O. I reread the posts of tautech, ratmole and others - you are competent guys and I ask for your help.
tautech:
--- Quote from: AlexZ on March 30, 2021, 02:48:51 pm ---Hello everybody! There is an AKIP 4115/5A oscilloscope (SIGLENT SDS1152CML) When turned on, it hangs on the LOGO, connected the J11 connector , in the terminal it gives everything exactly the same as huxfluxdeluxe can not mount a USB flash drive. When loading the device, the USB flash drive is read, but then I can't find it when the KERNEL is loaded |O. I reread the posts of tautech, ratmole and others - you are competent guys and I ask for your help.
--- End quote ---
Welcome to the forum.
Hopefully without a SD card holder we can recover this with USB tools.
PM sent.
tv84:
--- Quote from: AlexZ on March 30, 2021, 02:48:51 pm ---Hello everybody! There is an oscilloscope SIGLENT SDS1152CML
--- End quote ---
Pay attention. Your is a SIGLENT SDS1152CML+ ! Don't confuse it with non + versions.
AlexZ:
Today I soldered the SD card holder, microSD is read by the mmc part command in uboot.
tautech:
--- Quote from: tv84 on March 30, 2021, 02:58:20 pm ---
--- Quote from: AlexZ on March 30, 2021, 02:48:51 pm ---Hello everybody! There is an oscilloscope SIGLENT SDS1152CML
--- End quote ---
Pay attention. Your is a SIGLENT SDS1152CML+ ! Don't confuse it with non + versions.
--- End quote ---
I suspect it is however how did you spot this ? LAN = + model.
Some CML+ do have a SD card holder. :-//
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version