Products > Test Equipment
Help restore SDS1102CML+ after unsuccessful flashing
tautech:
--- Quote from: AlexZ on March 30, 2021, 03:03:04 pm ---I soldered the microsd card holder today, I thought that I could see it through it did not work. AKIP 4115/5A the same SIGLENT SDS1152CML+
--- End quote ---
Check your messages.
AlexZ:
--- Quote from: tautech on March 30, 2021, 03:06:14 pm ---
I suspect it is however how did you spot this ?
Some CML+ do have a SD card holder. :-//
--- End quote ---
microSD was able to check with the mmc part command in U-BOOT, an answer was received about the number of blocks on the microSD, i.e. the port itself and the katra working is obtained now. only I can't see it outside of U-BOOT
tv84:
--- Quote from: tautech on March 30, 2021, 03:06:14 pm ---I suspect it is however how did you spot this ?
Some CML+ do have a SD card holder. :-//
--- End quote ---
:) You're the expert in these recoveries.
The CML+ is an ARM machine as his logs shows. The CML would be a BF with no uboot...
I was just warning so that, in despair, he wouldn't try to flash a CML FW.
AlexZ:
--- Quote from: tv84 on March 30, 2021, 03:40:28 pm ---The CML+ is an ARM machine as his logs shows.
--- End quote ---
Can the SIGLENT SDY8.007.107E CML_1700 motherboard number match SDS1152CML+ ?
tautech:
--- Quote from: tv84 on March 30, 2021, 03:40:28 pm ---
--- Quote from: tautech on March 30, 2021, 03:06:14 pm ---I suspect it is however how did you spot this ?
Some CML+ do have a SD card holder. :-//
--- End quote ---
:) You're the expert in these recoveries.
The CML+ is an ARM machine as his logs shows. The CML would be a BF with no uboot...
I was just warning so that, in despair, he wouldn't try to flash a CML FW.
--- End quote ---
Yes of course and because it has a LAN socket it must be a + model.
Anyways work to do getting Alex fixed up.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version