Products > Test Equipment
Help restore SDS1102CML+ after unsuccessful flashing
tautech:
--- Quote from: jhnlmn on June 18, 2023, 06:56:44 pm ---Hi,
My SDS1102CML+ prints "Uncompressing Linux... done, booting the kernel." and nothing more.
I tried to flash files from P21R2.zip, which was posted in https://www.eevblog.com/forum/testgear/siglent-ads-firmware-file-format/msg3280472/#msg3280472 but that made no difference.
I noticed that files P21R2.zip are from 2015/2016 but my SDS1102CML+ is new.
I wonder whether I can download some other, may be newer files from somewhere?
Thank you
--- End quote ---
Welcome to the forum.
All recent firmware files are here at the US Siglent website:
https://siglentna.com/service-and-support/firmware-software/digital-oscilloscopes/#sds1000cml-series
jhnlmn:
But official firmware from Siglent only contains P21R2.ADS, which cannot be installed if Linux does not start. Can it?
I tried placing P21R2.ADS to USB stick and rebooting, but nothing happens.
I see that it is trying to read ro_uImage, rootfs.img, datafs.img and logo.bmp, but not P21R2.ADS.
tautech:
--- Quote from: jhnlmn on June 19, 2023, 01:47:59 am ---But official firmware from Siglent only contains P21R2.ADS, which cannot be installed if Linux does not start. Can it?
I tried placing P21R2.ADS to USB stick and rebooting, but nothing happens.
I see that it is trying to read ro_uImage, rootfs.img, datafs.img and logo.bmp, but not P21R2.ADS.
--- End quote ---
Oh a boot freeze, that is different !
Send a PM with your contact email and we'll have you fixed up in no time.
rdekens@internode.on.net:
Greetings - have a SDS 1104x-E that has decided to suddenly become a teapot -
Siglent inital splash screen comes up - - all the lights ( and I mean all buttons) stay lit - you can see it try to reset ? buttons dim for a sec but nothing further
have tryed with the USB - nothing -
have connected on j11 and get a poor serial trace - couple of random strings and then just a never ending character stream
as below
so i need some help !
ñññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññññVQÚ¿%5#¿7%=¿£££åë ^H¤¦)úë=µýSwe}£££¿åëY=¿%5#¿7%=¿7!#5£¿åë y½Þ¯UÛ…!¿›Ÿ—£Ÿ‘¥#™›‘“Ÿ¿¯e=¿›™¿›Ÿ¿¥¿Ÿ‹™•‹›åëåë{!=7‹íO-'-#¿K
#åëm›y‹¿¿¿5=7
åëw[}e‹¿¿uyy¿7-=;'57¿›—™¿e-{åë ¬Ý-¿¿›•“¿e-{åëeey‹¿¿¿
#A7/9-‹¿Ÿåë µµµ‹õ#-#1¿¥¿;=7¿y[y§¿-#1¿753='¿5#-!#%5#åëåëm#‹¿¿¿¿5-='åëa‹¿¿¿5-='åëu‹¿¿¿5-='åë-#¿;!=7A'=5A-#-¯!-7©©©©©åëImcsaE-#¿3;A7-'=
A'!1!¯!-7©©©©©©©©©©©©åë R[¬®}Y!=15e5%…Ÿ3=ŸŸŸŸŸ§¿'!1!A7==…Ÿ›ŸŸŸ™“§¿-7/…ŸŸ§¿/5-1/…—Ÿåë¿ R[¬®µ#¿3;A7-'=
A'!1!¯!-7¥¥¥¥¥¥¥¥¥¥åë-#¿;!=7A'=5A-#-¯!-7¥¥¥¥¥åëc5‹¿¿¿q5%£5ŸŸŸ;ŸŸŸåëo-¿=#
¿)5
¿!¿!¿=!;!!‹¿¿¿ïï￟¿åë
#¥;!!ƒ¿ ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
...
Regards
Rayman
Francesco:
--- Quote from: tautech on March 16, 2021, 07:23:15 pm ---
--- Quote from: huxfluxdeluxe on March 16, 2021, 04:26:53 pm ---Hello everyone! I have Siglent SDS 1102CML+ at work that doesn't start.
Is there another way to bring it back to life? I've noticed microSD slot next to UART interface, what's it for?
--- End quote ---
Contact me by PM with your email.
I have some tools that will help...........
--- End quote ---
Googmorning tautech,
my name is Francesco and i m a newbie. Last week my friend gifted to me a sds 1102cml+ with a lock logo screen ...and ..if possible, i would fix it.
I have many problems....because my english is so bad and my skill in this topic are too low for understand all...but i know somthing welding electronics boards
So...I soldering wire and connect to rs232 usb adpator. I download from siglent Easy scopex and i conneced to him with rs232 ( same photo on link [url]https://www.eevblog.com/forum/testgear/help-restore-sds1000cml-after-unsuccessful-flashing/25/]https://www.eevblog.com/forum/testgear/help-restore-sds1000cml-after-unsuccessful-flashing/25/).
Now i don't say how walkaway....
Thank a lot
Francesco
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version