Products > Test Equipment
High resistance leads on meter
<< < (6/6)
Wmesquite:

I'd expect a pair of Probemasters  to be higher than 49 milliohms, so measured by an accurate meter with higher resolution would give a figure that would round to 100 millohms/  0.1Ω. Maybe it is off by 30 milliohms on the whole scale  :o. Regardless, getting a measurement to within 1 digit is well within the resistance accuracy spec of .3% + 3 digits. Brymen might even tilt the scale down a hair on low ohms, if nothing else everyone would bitch about the crappy leads Brymen sent if their leads read 0.2Ω on a meter that was half to 1 count off in the other direction.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod