Products > Test Equipment
HoldPeak current probes HP-605X, any good ?
(1/5) > >>
Caaarlo:
Hi,
Looking for DC current clamp probes for my meter and oscilloscope, I came across these unknown (at least for me) probes:

HoldPeak HP-605A (600A AC/DC) ~USD 17 on Aliexpress
HoldPeak HP-605C (40A/6A AC/DC)    ~USD 33 on Aliexpress

There is almost no technical information on these probes. Furthermore, the smaller probe specifies 2 different output ratios, but I see no way of selecting them (Switch, button, etc)

Anyone ever heard or reviewed any of these probes ? I will appreciate any comment. TIA.



ebclr:
Caution, Quality control at HoldPeak is no existent, I bought 100 multimeters for resale from then and all of them are  not working, and they refused a return, Caution is necessary, you will get what you paid for
Microcheap:
If you are aiming at cheap chinese options, check the Hantek CC-65  (65A) or CC-650 (650A) also available on Aliexpress.
Caaarlo:
Yes, already seen those. But never heard of these new HoldPeak ones. There's a review on a russian site, and besides some error, I worked good after some recalibration.

Google translation is a PITA, but here it goes:
https://translate.google.com/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=https%3A%2F%2Fmysku.ru%2Fblog%2Faliexpress%2F55820.html&edit-text=
tautech:
Unless its -3dB frequency roll off is listed or can be quantified buy something else.

The Hantek CC-65 is rated to 20 MHz KHz BW and still too low BW for power electronics.
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod