Products > Test Equipment

How many time can I physically connect and disconnect a hard drive?

(1/2) > >>

electronbean:
Hello everyone,

I intend know how many time could I attach and detach a hard drive on drive bay HDD like this: https://www.newegg.com/orico-1106ss-v1-bk-1-x-3-5-drive-to-5-25-bay/p/0VE-000W-00018?Description=5.25%20hard%20drive%20bay&cm_re=5.25_hard%20drive%20bay-_-9SIA1DS0FS5106-_-Product

I need put on hard drive and push outside the hard drive when my job is finish. I do this around 10 time for month. In a year will be 120 times. I am concerning with connectors SATA data and SATA power on hard drive. Could I will get problems, like bad connections, cold welding or another issues?

I search about datasheet of the hard drive I found this: https://documents.westerndigital.com/content/dam/doc-library/en_us/assets/public/western-digital/product/internal-drives/wd-blue-hdd/product-brief-western-digital-wd-blue-pc-hdd.pdf

But this document didn't refer information about how many time I can physically connect and disconnect the hard drive.

Thank you

coromonadalix:
for sure there is a limit to contacts wear ............  but in this occasion,  i use trays with included power switches in the enclosure   loll

Still going strong after years

But for sure you're in need to remove it as a safety,  only thing i can say 

For other guys i know:  after a thousand insertion the tray is ditched,  and others say after 500 inserts ...


Maybe this ?

https://www.reddit.com/r/DataHoarder/comments/inzo2g/hdd_sata_port_durability/

or this :

How durable are SATA connectors?
The connectors are SATA compliant and meet a wide range of vertical and right angle configurations for usage across server and storage equipment, HDDs and HDD carriers. Durability: 500 mating cycles ▪ Mating Force: 45N max.

Georgy.Moshkin:
I had similar question and I thought of using these or similar products (see attached image). Moreover, my old notebook had an sata to sata extension pcb, somethimg like that could help to transfer wear off from hdd connector to extender connector

GigaJoe:
such kind of connectors usually around 500-1000 inserts

David Hess:
It will depend on how good and thick the surface plating is on the connector surfaces.  The minimum specification for SATA is something like 50 insertion cycles, however I would expect 100s of cycles if not abused.  Unfortunately there is a lot of variation in quality from various suppliers so there is no way to really know.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod