Products > Test Equipment
HOW TO CALIBRATE SIGLENT SDG1032X
<< < (3/7) > >>
KungFuJosh:

--- Quote from: uargo on October 16, 2023, 08:23:39 pm ---Being on channel 1 (for example), press the "waveform" key then go to page 2, click on "DC", and with "DC Offset" you choose the voltage.
It leaves you from -10vdc to 10vdc

--- End quote ---

Try testing the ACVrms and see if that comes back accurately.
uargo:
ok thanks Tautech
uargo:
SDG1032X - Sine wave 1KHz 1mVrms
SDM3055 = 0.991 mVrms

SDG1032X - Sine wave 1KHz 1Vrms
SDM3055 = 1.00850 Vrms
KungFuJosh:

--- Quote from: uargo on October 16, 2023, 08:34:44 pm ---SDG1032X - Sine wave 1KHz 1mVrms
SDM3055 = 0.991 mVrms

SDG1032X - Sine wave 1KHz 1Vrms
SDM3055 = 1.00850 Vrms

--- End quote ---

That's pretty good. Now, try again, and view the DC voltage BEFORE applying any DC Offset.
uargo:

--- Quote from: KungFuJosh on October 16, 2023, 08:39:40 pm ---
--- Quote from: uargo on October 16, 2023, 08:34:44 pm ---SDG1032X - Sine wave 1KHz 1mVrms
SDM3055 = 0.991 mVrms

SDG1032X - Sine wave 1KHz 1Vrms
SDM3055 = 1.00850 Vrms

--- End quote ---

That's pretty good. Now, try again, and view the DC voltage BEFORE applying any DC Offset.

--- End quote ---

When I talk about DC it is a pure DC, without AC of any kind.
and continues measuring the same as before
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod