Products > Test Equipment

HOW TO CALIBRATE SIGLENT SDG1032X

<< < (3/7) > >>

KungFuJosh:

--- Quote from: uargo on October 16, 2023, 08:23:39 pm ---Being on channel 1 (for example), press the "waveform" key then go to page 2, click on "DC", and with "DC Offset" you choose the voltage.
It leaves you from -10vdc to 10vdc

--- End quote ---

Try testing the ACVrms and see if that comes back accurately.

uargo:
ok thanks Tautech

uargo:
SDG1032X - Sine wave 1KHz 1mVrms
SDM3055 = 0.991 mVrms

SDG1032X - Sine wave 1KHz 1Vrms
SDM3055 = 1.00850 Vrms

KungFuJosh:

--- Quote from: uargo on October 16, 2023, 08:34:44 pm ---SDG1032X - Sine wave 1KHz 1mVrms
SDM3055 = 0.991 mVrms

SDG1032X - Sine wave 1KHz 1Vrms
SDM3055 = 1.00850 Vrms

--- End quote ---

That's pretty good. Now, try again, and view the DC voltage BEFORE applying any DC Offset.

uargo:

--- Quote from: KungFuJosh on October 16, 2023, 08:39:40 pm ---
--- Quote from: uargo on October 16, 2023, 08:34:44 pm ---SDG1032X - Sine wave 1KHz 1mVrms
SDM3055 = 0.991 mVrms

SDG1032X - Sine wave 1KHz 1Vrms
SDM3055 = 1.00850 Vrms

--- End quote ---

That's pretty good. Now, try again, and view the DC voltage BEFORE applying any DC Offset.

--- End quote ---

When I talk about DC it is a pure DC, without AC of any kind.
and continues measuring the same as before

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod