Products > Test Equipment
how to connect siglent sds1102dl to computer?
<< < (2/2)
sonielkraf:
ok, i try download ni visa first
coromonadalix:
you ask  and dont provide much

if you are in windows  check in device manager for any requested usb driver,  normally    it should not be a problem

the Visa  is an interface layer   

you have Ni Visa, Rhode & Schwartz,  Keysight i/o librairies   etc ....  i use Rhode Schwartz  Visa, they have simpler tools to do communications and tests

What ever Visa you use,   the scope  will still be dumb,  it depends on how you want to control it, if you have the correct softwares for it


you have posted  for firmwares and other things, i think you need to learn ??

and if it for FW recoveries  that's another thing
sonielkraf:
thanks , yes i need to learn to connect to windows 10, thats why i ask on the forum, because i really to learn it, thank you
BillyO:
Download the software for it from Siglent and all the documentation for it.  It will give you step by step instructions.

Here is the North American page for software and drivers: https://siglentna.com/service-and-support/firmware-software/digital-oscilloscopes/#sds1000-series

Here is the documentation: https://siglentna.com/resources/documents/digital-oscilloscopes/#sds1000dl-series
coromonadalix:
check the hardware properties of the device with exclamation mark, and read the vid pid  of this device  you will learn what it is or what it need to work

google on how to find drivers on unknown devices etc ...  you obviously need to learn that
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod