Products > Test Equipment
how to connect siglent sds1102dl to computer?
sonielkraf:
ok, i try download ni visa first
coromonadalix:
you ask and dont provide much
if you are in windows check in device manager for any requested usb driver, normally it should not be a problem
the Visa is an interface layer
you have Ni Visa, Rhode & Schwartz, Keysight i/o librairies etc .... i use Rhode Schwartz Visa, they have simpler tools to do communications and tests
What ever Visa you use, the scope will still be dumb, it depends on how you want to control it, if you have the correct softwares for it
you have posted for firmwares and other things, i think you need to learn ??
and if it for FW recoveries that's another thing
sonielkraf:
thanks , yes i need to learn to connect to windows 10, thats why i ask on the forum, because i really to learn it, thank you
BillyO:
Download the software for it from Siglent and all the documentation for it. It will give you step by step instructions.
Here is the North American page for software and drivers: https://siglentna.com/service-and-support/firmware-software/digital-oscilloscopes/#sds1000-series
Here is the documentation: https://siglentna.com/resources/documents/digital-oscilloscopes/#sds1000dl-series
coromonadalix:
check the hardware properties of the device with exclamation mark, and read the vid pid of this device you will learn what it is or what it need to work
google on how to find drivers on unknown devices etc ... you obviously need to learn that
Navigation
[0] Message Index
[*] Previous page
Go to full version