Products > Test Equipment
How to promote an USB oscilloscope to individual engineers? I am the Loto instru
ataradov:
You are omitting some critical technical details. Your thing has far too slow of a sampling rate to be a scope, so it is more of a logger. But for a logger, you need to specify waveform update rate and how long the gaps in the data are. What triggering options are implemented in the hardware and what are implemented in the software.
You have to provide actual technical information, not the marketing BS, especially give that it is clear that you are not very good at it.
jiangtao.lv:
thank you maginnovision,
but things not like you thought.
I made that video not for promoting my product here.It 's a trouble shooting explanation.
Maybe it's because of differences in national conditions or cultures. Most of my clients don't know the sincerity of the probe.
Many of our customers will question us and say something that they can't measure the frequency higher than 10 trillion sine wave. Then we found that most of them used a X1 probe to test a high frequency signal. So i made that video to show how osc802 act in both X1 and X10 gear and compared with a expensive desk top one.
maginnovision:
--- Quote from: jiangtao.lv on January 27, 2019, 05:00:28 am ---thank you maginnovision,
but things not like you thought.
I made that video not for promoting my product here.It 's a trouble shooting explanation.
Maybe it's because of differences in national conditions or cultures. Most of my clients don't know the sincerity of the probe.
Many of our customers will question us and say something that they can't measure the frequency higher than 10 trillion sine wave. Then we found that most of them used a X1 probe to test a high frequency signal. So i made that video to show how osc802 act in both X1 and X10 gear and compared with a expensive desk top one.
--- End quote ---
Then I think you're better off not showing anyone how to improperly do things. Show the right way and maybe they'll follow your lead.
jiangtao.lv:
Yes , ataradov, you are right.
Engineers prefer to discuss specific technical details.otherwise, I want to know what the engineers think about the application scenario of this product.I haven't done technology for years, maybe more like a businessman.So there may be misunderstandings, and because my English is not very expressive, oh, what I think.
So it looks more like a salesman fell among a bunch of engineers. ;D
jiangtao.lv:
it's my poor English expression 's fault....
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version