| Products > Test Equipment |
| How to promote an USB oscilloscope to individual engineers? I am the Loto instru |
| << < (5/26) > >> |
| jiangtao.lv:
dear ataradov: I aimed low end market,do you think it's proper for Junior Engineer, Electronic Enthusiast, Field Maintenance use? |
| ataradov:
--- Quote from: jiangtao.lv on January 27, 2019, 05:17:27 am ---I aimed low end market,do you think it's proper for Junior Engineer, Electronic Enthusiast, Field Maintenance use? --- End quote --- I don't know. We have not seen any real performance evaluation of the thing. We have only seen an unwatchable shaky video that does not really show anything. For not much ore you can get a better PicoScope, which has plenty of independent reviews and good reputation. I'm not saying that the product is bad, but you need to take all the feedback provided here seriously and implement the changes, not just acknowledge issues. Ans I would reach out to a few YouTubers and send them a review units. |
| maginnovision:
I'd also say if this thing doesn't have isolated inputs you need to make sure people are aware of that. Especially for beginners. |
| Rerouter:
Hobbiest level, e.g. Arduino type user If you have protocol decoders like SPI, I2C, Uart, then yes there is some room, I2S would probably catch people from the audio side of it Electronics enthusiest, harder to say, Feild maintainance would need to handle up to 50V without damage on the inputs, If you wanted to poke at automotive then Canbus is a good decoder to have. CanFD would put you well ahead of the competition, Expecially when tied with playback. As at present there are very few tools out there that you can capture a signal on site and replay it with minimal fuss for under $700, In reality just about every country keeps there industrial signalling under 50V, 24V and 48V are the more common higher ones, Again if it works with an X10 probe, then fine, just make sure it can survive being hooked up to 50V direct to the BNC. |
| jiangtao.lv:
I had another video to show the input protection, but i have not translate it into English, may be you can get it with Chinese. https://m.youku.com/video/id_XNDAxODA1Mzk4MA==.html?spm=a2h3j.8428770.3416059.1&source=&from=timeline&isappinstalled=1 in the video ,i input a 60V voltage into a +-5V input,it's ok. |
| Navigation |
| Message Index |
| Next page |
| Previous page |