| Products > Test Equipment |
| HP 34401A 3457A 3456A 3478A Standalone Software |
| << < (17/19) > >> |
| Nx-1997:
In the Config Tab, click the Display Tab then click the Off button. You can send any commands while logging. |
| Zucca:
--- Quote from: tv84 on June 26, 2021, 08:12:47 am ---Your animated .GIFs are awesome! :clap: --- End quote --- Nice shit! Congrats. Side questions.... Can you tell us what to you use to create the gifs? If everybody on this forum could be a gif ninja like you.... Game changer.... |
| Nx-1997:
--- Quote from: Zucca on January 14, 2022, 03:39:43 am --- --- Quote from: tv84 on June 26, 2021, 08:12:47 am ---Your animated .GIFs are awesome! :clap: --- End quote --- Nice shit! Congrats. Side questions.... Can you tell us what to you use to create the gifs? If everybody on this forum could be a gif ninja like you.... Game changer.... --- End quote --- https://github.com/NickeManarin/ScreenToGif |
| Jester:
Nx-1997, I really like your program, It works perfectly on my Win7-64 machine. I'm now trying to get it working on a Win10-32 tablet and have a hiccup. My guess is that I'm missing some aspect of the NI-VISA let me explain. When I installed NI-VISA on my 64 bit machine, I installed the latest version 21.0 and NI installer offered about 10 optional (not sure if they were applications or drivers), they were all ticked by default so I just let it install everything. It took a while. this version works. When I tried installing version 21.0 on my 32bit flavor of Win10 on the tablet, Windows complained that the installer requires at minimum a 64 bit version of Win10. So I instead installed NI-VISA version 20.0 and this time I unchecked all the extras (I probably should not have done that). I proceeded as before however two issues were obvious: 1) In the Conflict manager I don't see National Instruments VISA.NET Resource manager under VISA.NET 2) I was also missing NI-VISA Interactive control application, (this was likely one of the ticked applications that I un-ticked) I added this after the fact, ran it and it now acts like before, recognizing the 3 connected devices, however most likely I'm still missing something else and when I try to connect using your application I get a Windows error, see below. I'm going to try to uninstall NI-VISA and then reinstall with all the "optional" tick boxes ticked and see what happens. Well I tried installing all the optional add-ons, and same thing, so I'm guessing this might be a 32bit vs. 64bit compatibility issue? UPDATE: The program is fine, the problem was Win 10 updates! I tried a few things nothing helped and then I tried a full Windows update and it started working. |
| ipqobk:
Hi Nx-1997 I wanted to thank you for making the programs available. They work perfectly on my laptop with Win10 enterprise 64bit. I connected my HP3456A and HP3457A with AR488 (GPIB to USB ver 0.51.03_19.01.2022) interfaces to usb on Raspberry PI4 (4GBram), Raspbian GNU/Linux v.11 (bullseye) 5.10.92-v7l+ #1514, RealVNC server 6.7.4. In the system runs ser2net (4.3.3-1) which allows to access virtual serial ports on different IP ports (two AR488, one Korenix JetCon 1104 with four RS232 to usb converter, one Prologix converter), also on raspberry a Agilent 82357B and BME280/SMBus, one rs232 port interfaces the gpsdo trimbolt for remote data to Lady Heather's (thank to KE5FX). On a Pc/win your programs see the instruments on the virtual serials made available by Perle TruePort v6.9. I connect them from a remote site via vpn,and everything is working fine with an excellent GUI. :-+ As soon as I have some time I try to try the software also through Visa GPIB. |
| Navigation |
| Message Index |
| Next page |
| Previous page |