Products > Test Equipment

HP 34401A 3457A 3456A 3478A Standalone Software

<< < (17/19) > >>

Nx-1997:
In the Config Tab, click the Display Tab then click the Off button. You can send any commands while logging.

Zucca:

--- Quote from: tv84 on June 26, 2021, 08:12:47 am ---Your animated .GIFs are awesome!  :clap:

--- End quote ---

Nice shit! Congrats.

Side questions....

Can you tell us what to you use to create the gifs?
If everybody on this forum could be a gif ninja like you....

Game changer....

Nx-1997:

--- Quote from: Zucca on January 14, 2022, 03:39:43 am ---
--- Quote from: tv84 on June 26, 2021, 08:12:47 am ---Your animated .GIFs are awesome!  :clap:

--- End quote ---

Nice shit! Congrats.

Side questions....

Can you tell us what to you use to create the gifs?
If everybody on this forum could be a gif ninja like you....

Game changer....

--- End quote ---

https://github.com/NickeManarin/ScreenToGif

Jester:
Nx-1997,
I really like your program, It works perfectly on my Win7-64 machine. I'm now trying to get it working on a Win10-32 tablet and have a hiccup. My guess is that I'm missing some aspect of the NI-VISA let me explain.

When I installed NI-VISA on my 64 bit machine, I installed the latest version 21.0 and NI installer offered about 10 optional (not sure if they were applications or drivers), they were all ticked by default so I just let it install everything. It took a while. this version works.

When I tried installing version 21.0 on my 32bit flavor of Win10 on the tablet, Windows complained that the installer requires at minimum a 64 bit version of Win10. So I instead installed NI-VISA version 20.0 and this time I unchecked all the extras (I probably should not have done that). I proceeded as before however two issues were obvious:
1) In the Conflict manager I don't see National Instruments VISA.NET Resource manager under VISA.NET
2) I was also missing NI-VISA Interactive control application, (this was likely one of the ticked applications that I un-ticked) I added this after the fact, ran it and it now acts like before, recognizing the 3 connected devices, however  most likely I'm still missing something else and when I try to connect using your application I get a Windows error, see below.  I'm going to try to uninstall NI-VISA and then reinstall with all the "optional" tick boxes ticked and see what happens.

Well I tried installing all the optional add-ons, and same thing, so I'm guessing this might be a 32bit vs. 64bit compatibility issue?

UPDATE:
The program is fine, the problem was Win 10 updates!

I tried a few things nothing helped and then I tried a full Windows update and it started working.

ipqobk:
Hi Nx-1997
I wanted to thank you for making the programs available. They work perfectly on my laptop with Win10 enterprise 64bit.
I connected my HP3456A and HP3457A with AR488 (GPIB to USB ver 0.51.03_19.01.2022) interfaces to usb on
Raspberry PI4 (4GBram), Raspbian GNU/Linux v.11 (bullseye) 5.10.92-v7l+ #1514, RealVNC server 6.7.4.
In the system runs ser2net (4.3.3-1) which allows to access virtual serial ports on different IP
ports (two AR488, one Korenix JetCon 1104 with four RS232 to usb converter, one Prologix converter), also on raspberry
a Agilent 82357B and BME280/SMBus, one rs232 port interfaces the gpsdo trimbolt for remote data to Lady Heather's (thank to KE5FX). 

On a Pc/win your programs see the instruments on the virtual serials made available by Perle TruePort v6.9.

I connect them from a remote site via vpn,and everything is working fine with an excellent GUI.  :-+

As soon as I have some time I try to try the software also through Visa GPIB.


Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod