Products > Test Equipment

HP 410b / 410c Probes & Leads Repair / Replace

(1/1)

The Doktor:
I am currently repairing my HP 410b VTVM, as well as trying to provide some help to another fellow who is doing the same.

The main thing I'm interested in is the AC probe and it's cable. I purchase some Belden 9222 quite cheaply a while back planning to use that to replace the probe cable. Is that a good choice, or is it likely to have the center conductor fatigue and break in short order?  If the 9222 is not a good choice, is there a better Triax cable you can recommend? I have seen that kiss-electronics.com sell something they say is superflex Triax for the probe lead, for $35. I'd rather try to do it cheaper, but that is an option if there is nothing else recommended.

Are there any other problems with the AC probe that I should be aware of? I have had good luck with it over the years, but if it is prone to any type of problem, I would still prefer to take steps to prevent it.

 For the DC lead, what is a good, highly flexible coax to use for that?


Thanks
Ed

kbrill:
I have a 11036a probe ( complete ?) as well as many partial assemblies which include cable & plug . while tarnished all are new replacement parts I purchase at a large military electronics auction in bulk .

Contact me if this will be of any help .

Ken

DrewUSN:
I have a 410B that needs an AC assembly, would you happen to have one or parts of it? I know this an old thread but I’m looking for options.

Thx,

Drew

kbrill:
I only have partial probe assemblies :consisting of the following :

1251-0209 telephone plug
11036-42102 boot
actual cable red
11036-42101 boot
11036-62101 tube socket and cable assembly
All components are new and pre-assembled
Hardly a complete probe but the most often required replacement parts

Cost would be minimal

kbrill:
You probably should have contacted me directly as I am not really following that thread

 I only have partial probe assemblies :consisting of the following :

1251-0209 telephone plug
11036-42102 boot
actual cable red
11036-42101 boot
11036-62101 tube socket and cable assembly
All components are new and pre-assembled
Hardly a complete probe but the most often required replacement parts

While doubtful if this would be of any assistance  to you the cost would me minimal

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod