Products > Test Equipment

HP 4141 manuals

(1/2) > >>

chilternview:
Picked up a HP 4141 today that was going cheap on eBay. For those that have never heard of it, it has 4 SMUs to force/measure current and voltage, plus 2 voltage sources and 2 voltage measurement units. It's in pristine condition and powers on and passes self test, but I have no manuals for it (it needs to be controlled via the IEEE488 bus). Does anyone know where I can find them? In particular the programming manual.
Thanks.

Wallace Gasiewicz:
I did not look specifically for your manual but this person has lots of good copies of HP and other manuals

http://artekmanuals.com/manuals/hp-manuals/

Possibly this can help:

https://forums.ni.com/t5/Instrument-Control-GPIB-Serial/help-talking-to-hp-4141/td-p/1143322

chilternview:
Thanks, that is just what I'm looking for!

Swainster:
Just to add a +1 for Artek - I've been very satisfied with the 2 or 3 manuals that I've purchased and downloaded from them. They were all professional quality reproductions from originals scanned by themselves.

Wallace Gasiewicz:
I have also ordered a few manuals from Artek.  They are much better than any free manuals I have downloaded from the web.
The schematics, when they are available. are especially more clear from Artek

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod