Products > Test Equipment

HP 5335A Timer / Counter - Anything i should know?

<< < (14/34) > >>

jmsc_02:
Dear,

Recently I won a 5335a from ebay. I've tested inputs A & B and seems ok.

It's a unit from 1982, I know it by the date of the IC's because the serial prefix has been deleted for someone in the past :(
Also, the unit has 4 sticks saying "Option 010, 020, 030 & 040". Looking outside & inside I see the OXCO & the cards for the  Voltmeter & Input C but I can not see the 040 opt. I need to study the manual to discover it because I do not find anything commented on this thread.

 a pictures of the unit & I have a question:

Who is lying, the 33210A or the 5335A? :-DD :-// (there is a continuous offset of 1,2ppm on frequency measurements)

Vgkid:
Option 40 is installed. Notice how many more triggering/input buttons are installed compared to the non opt 40 units

agronaught:
I've enjoyed having my 8335. 

One question though, when the inevitable tantalum failures happen, are you replacing with axial tantaliums or other?

Ive not managed to find a suitable source for these components. 


Sent from my Nexus 5 using Tapatalk

Vgkid:
I dont think that the axial tants are of the wet slug variety, so you can replce them with uprated radial ones.

Vgkid:
Does anyone have the size of the back power input connector, or are they almost universal for a given style. I nitifed that my frequency jumps have started appearing again.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod