Products > Test Equipment
HP 70K/HP 70000 Modular Measurement System Thread
<< < (8/20) > >>
pquadrat:
I was able to write the TD0 file with the DLP program to a floppy disk without errors:

0. Use an old PC, 386 or 486 with DOS 6.22 or so
1. Format the floppy with HP LIFUTIL, DD double sided
2. use Teledisk 2.16 (2.11 does not work) to write the image.

But when I try to load the DLP into the 70900B, I get error 2055, bad file format. I think the LIF header is drong.

I can save and load states to the floppy without problems.

Any tips?


Edit:
With the method above I had SUCCESS with the 71910A receiver personality software, which can be found as a TD0 disk image on groups.io
K9DTV:

--- Quote from: pquadrat on April 28, 2021, 03:40:43 pm ---I was able to write the TD0 file with the DLP program to a floppy disk without errors:

0. Use an old PC, 386 or 486 with DOS 6.22 or so
1. Format the floppy with HP LIFUTIL, DD double sided
2. use Teledisk 2.16 (2.11 does not work) to write the image.

But when I try to load the DLP into the 70900B, I get error 2055, bad file format. I think the LIF header is drong.

I can save and load states to the floppy without problems.

Any tips?


Edit:
With the method above I had SUCCESS with the 71910A receiver personality software, which can be found as a TD0 disk image on groups.io

--- End quote ---

First, I used the 70K system to format the disk.
Next I downloaded the memory from the 70900B
Then I uploaded it to another 70K systems 70900B.

Is this the software you are taking about in the group.io?
https://groups.io/g/HP-Agilent-Keysight-equipment/topic/24910293?p=,,,20,0,0,0::,,,0,0,0,24910293

I have not looked at this before, so I will look in to it.

You could also send me a PM and maybe I can just send you a disk.
I think you have have two ram cards and you could send one to me and I could load it on it for you.

Jim






pquadrat:
These two disks are the ones I found:

Receiver Personality:
https://groups.io/g/HP-Agilent-Keysight-equipment/files/Above%2070000%20MMS/71910A%20Receiver%20Personality%20DLP

Demo DLP:
http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=HP_Agilent/HP_70000

The receiver personality works, I can load it, but the customer demo DLP doesn't

I can write and read states etc. to a disk and read them back, no problem. It just does not accept the demo DLP.

K9DTV:

--- Quote from: pquadrat on April 29, 2021, 07:22:18 am ---
Demo DLP:
http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=HP_Agilent/HP_70000


--- End quote ---

The Demo DLP is for the 9000/300 computers, the stuff I am working with right now is the 70900 DLP
tkamiya:
HT Basic from here works.  Run time and development versions are pretty expensive but demo works for 30 minutes at a time.  (It can run under modern Windows)

https://transera.com/
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod