| Products > Test Equipment |
| HP 8566B Debug/Rebuild |
| << < (3/4) > >> |
| Kean:
OK, that is kind of what I expected. But I'm sure they can be fixed. Be careful as you disassemble further - unsurprisingly it can be easy to damage the parts. I've still got a couple here in the pile of things to work on (for my HP 8657B). |
| MarshallPlexi:
I found this video and have already purchased some O rings from Amazon that will be delivered tomorrow. Assuming that the O rings are bad, would that cause the solenoid to fire only in the retract position? Or could the driver chips have failed as well? |
| MarshallPlexi:
Another good video for people like myself who are working through this. |
| Kean:
--- Quote from: MarshallPlexi on September 26, 2024, 06:33:17 pm ---I found this video and have already purchased some O rings from Amazon that will be delivered tomorrow. Assuming that the O rings are bad, would that cause the solenoid to fire only in the retract position? Or could the driver chips have failed as well? --- End quote --- Ah yes, I recall seeing one of his other videos on this topic No idea if electronics are a common failure point on the newer models, but certainly possible. The mechanical operation issues are quite a common issue with age. From what I've seen other people reporting, yes they may stick in either state due to degraded o-rings. My guess is that it might be due to a short actuation time not able to overcome extra friction. Keep an eye out for any crap left behind clogging the holes or around the solenoid moving parts. --- Quote from: MarshallPlexi on September 26, 2024, 09:27:24 pm ---Another good video for people like myself who are working through this. --- End quote --- Oh, an hour long... I'll have to watch that another time. I assume from a quick scrub through the video he has an electronics fault? |
| MarshallPlexi:
Have you ever had one of those days where you fixed something and have no idea what you did that fixed it? That was my day. |
| Navigation |
| Message Index |
| Next page |
| Previous page |