Author Topic: HP 3466A Ohms problem  (Read 1182 times)

0 Members and 1 Guest are viewing this topic.

Offline downwind27

  • Contributor
  • Posts: 6
HP 3466A Ohms problem
« on: June 15, 2016, 08:29:23 pm »
My 3466A will not zero out on the 2 and 20 ohm ranges, adjustment pot is at the end of its travel and it still reads 0.5 ohm - and its not the test leads.  Anyone seen this problem before? The service manual is not much help because its low resolution and does not show the schematic in enough detail.

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo