Products > Test Equipment
HP AGILENT E4433B ESG-D SERIES SIGNAL GENERATOR 250KHZ-4.0GHZ
<< < (5/6) > >>
syau:
Wonder if anybody have the code so that I can adjust (correct) the output level at 3-4GHz. My unit tend to drop 2dbm at 4GHz when measure with a power meter.
Symeon:
Hello everybody,
purchased an E4433BG unit,testing it the output frquency id pretty accurate butthe amplitude is problematic....for example,setting it to 0dBm/10 MHz it gives -0.12dBm upon switching on and after about half an hour of operation it goes down to -0.45 dBm it carries an elecronic attenuator,any idea if this is an attenuator problem or one or more active stages are suffering / changing as the temperature increases during operation? the unit was toroughly cleaned ,voltages checked on motherboard and are correct...any ideas? thank you.  |O
roxbox:
EPSG software from HP https://roxbox.net/EPSG/

the above includes links to the downloads and links to just the README files

FixFuzzy
RemH98
Bluetooth waveforms for ESG-D and -DP
8648 Test Package
ESG E44XXB Test package
ESG AP/DP Test package
ESG E4438C Test package

Does anyone have links to other old HP adjustment software?
roxbox:

--- Quote from: tv84 on September 19, 2020, 08:27:37 pm ---
--- Quote from: PA0PBZ on September 19, 2020, 06:58:24 pm ---All I can see is a picture of a license generator... would be nice to have  :-//

--- End quote ---

You definitely are not doing the homework!  Google the generator and use it as shown.

Hint: Search for "lmcryptgui.rar".

--- End quote ---

Does anyone have a working link, every google link to lmcryptgui.rar seems to be a bust.

Got it, Thank You!
Tony_G:
Resurrecting an old thread in case someone has run into this.

While the thread was about the B series ESG SigGens, I have a C series ESG (E4438C) and when I try to use the associated service software I get an FMS Error "Could not retrieve model from Driver".

Did anyone suffer this and if so did you manage to solve it?

Thanks,

TonyG
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod