Products > Test Equipment
HP Logic Analyzer Inverse Assemblers
AndersG:
FWIW are the formats of the various 163X files documented in the programming manual.
gotcha:
Hello,
I recently got a HP 1650A and HP 16500B. Currently, I'm focusing on the HP 1650A.
My initial target is to use an inverse assembler for the Z80.
I found various files, floppy disk images, but I'm still a bit confused.
For example, I found a Z80 related floppy for the 1650A here (http://www.bitsavers.org/bits/HP/1650/hp_1650), but it doesn't tell if it's for working with a preprocessor interface or not, and the details of STAT.
In my particular case, I don't have any preprocessor interface for the Z80 (that as far as I understood, processes the control signal from the Z80).
I just have standard flying probes.
Is there a config file and a IA file I can use for this case ? Also, which pins should I use for STAT ?
MarkMLl:
--- Quote from: AndersG on April 24, 2023, 07:50:00 am ---FWIW are the formats of the various 163X files documented in the programming manual.
--- End quote ---
Yes, to the extent that you can extract enough configuration information to convert the file into e.g. a VCD. I've not, however, attempted to restore a configuration to an instrument.
MarkMLl
gslick:
--- Quote from: gotcha on May 20, 2023, 04:50:47 pm ---In my particular case, I don't have any preprocessor interface for the Z80 (that as far as I understood, processes the control signal from the Z80).
I just have standard flying probes.
Is there a config file and a IA file I can use for this case ? Also, which pins should I use for STAT ?
--- End quote ---
As mentioned here in this other thread, the original Z80 IA won't work correctly without the Z80 preprocessor:
https://www.eevblog.com/forum/testgear/older-logic-analyzer-question/msg4872758/#msg4872758
gslick:
There were some posts in a different forum which referred to this thread with questions about building a 10391B style inverse assembler into a 32-bit x86 DLL version of the inverse assembler using the version 03.60.0002 of the IAAnalysisAddInWizard from the 03.67.1008 version of the LA software CD-ROM.
One question was whether such a 32-bit x86 DLL version of the inverse assembler was also compatible with the newer version 05.90.1104 of the logic analyzer application. The answer to that question is yes. Such an inverse assembler can be loaded on the newer version 05.90.1104 of the logic analyzer application, when the logic analyzer application is loaded on either 32-bit or 64-bit versions of Windows.
The screenshot below shows the 32-bit x86 DLL version of the inverse assembler built from the i6800_p.r contained in the invasm_v3.zip file in the first post of this thread loaded in the 05.90.1104 version of the logic analyzer application running on the 32-bit version of Windows XP. I was also able to load it in the 05.90.1104 version of the logic analyzer application running on the 64-bit version of Windows 10.
I could post the 32-bit x86 DLL version of the i6800_p inverse assembler files here if anyone want those.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version