Author Topic: HP4284A calibration program  (Read 1101 times)

0 Members and 1 Guest are viewing this topic.

Offline LestronTopic starter

  • Newbie
  • Posts: 5
  • Country: us
HP4284A calibration program
« on: April 12, 2022, 11:00:49 pm »
Does anyone know if the 04284-65001/8 HP basic adjustment program has been translated for use on a newer computer than the HP9000 series.
I want to run through the cal as shown in the manual, but many steps require the use of the adjustment program.
If someone has the original program, I would  try to  port it to run on a windows or linux computer.


 
 

Offline ZhuraYuk

  • Regular Contributor
  • *
  • Posts: 105
  • Country: ua
Re: HP4284A calibration program
« Reply #1 on: November 21, 2024, 12:16:13 am »
I know this is old post but I would like to get this software in any form for any OS, so far nothing is found on the internet despite that this device is obsolete in Agilent website. Maybe some former employee can share it in personal messages ? I can promise to not share it in public access.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf