Products > Test Equipment
HP54501a (Boschert MC1368a)
(1/1)
AndreH:
Hi all. I have the hand drawn sketch of the Boshert MC1368a PSU used in a number of HP test gear. Does anyone know the value of R40 (the variable resistor that adjusts the 5.14V supply line) . Many thanks
wn1fju:
See picture.
Pin 1 of line filter goes to Pin 1 of power supply plug
Pin 2 of line filter goes to Pin 4 of power supply plug
Pin 3 of line filter goes to Pin 3 of power supply plug
Pin 4 of line filter goes to Pin 2 of power supply plug
Ground pin of line filter goes to Pin 6 of power supply plug (and to chassis ground)
Pin 5 of power supply plug is unused.
Power supply plug as viewed from top of scope (pin 1 is towards to rear of scope).
Navigation
[0] Message Index
Go to full version