EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: Satinseat on August 27, 2019, 01:22:38 pm
-
Anyone tell me what this is please. Found in late father in laws garage, still bagged[attach=2]
-
Clearer pic hopefully
-
You're hopeless at images, 82kB would do rather than 7MB. Some sort of boiler controller.
-
It is a test instrument to measure signal from flame sensor electrodes in gas burners. It is also possibly able to simulate the signal of such an electrode to test the relay/controller that such a sensor would be connected to in a burner control system.