Products > Test Equipment
If you only had one meter?
<< < (15/23) > >>
bdunham7:

--- Quote from: Fungus on April 19, 2023, 04:23:40 am ---It even wins without any probes connected!

--- End quote ---

Yes, it really is that good.  The MIN/MAX/AVG mode has a STOP button that freezes it and I can see that it is in that state.  The black bars on the right above the main display say "STOPPED" and "MINMAX".  No idea on the Gossen, maybe just a HOLD button?


--- Quote ---Does it have a high impedance measurement mode like the Fluke 8060A?

--- End quote ---

No, apparently you have to go with UNI-T if you want that feature nowadays.  Most people find the LOW impedance to be more practical in a handheld though.
Swainster:

--- Quote from: Fungus on April 19, 2023, 04:23:40 am ---
--- Quote from: PushUp on April 18, 2023, 11:53:54 pm ---

--- End quote ---

It even wins without any probes connected!

--- End quote ---

Wait, is that a mains breakout box? With unshrouded plugs?...in those colours? OK, must stop as I'm starting to sound like some kind of comedy sketch, but that looks a bit "how ya doin", even by my generally quite relaxed standards.
artag:
And what if you could have only one scope ?
tautech:

--- Quote from: artag on April 19, 2023, 08:20:16 am ---And what if you could have only one scope ?

--- End quote ---
Much rather have just a scope than only a meter.  :P
2N3055:

--- Quote from: PushUp on April 18, 2023, 11:53:54 pm ---For me, there is nothing better than the Fluke 289! ...and yes, anyone knows the disadvantages, but the advantages are the reason to buy it - at least for me, myself and I:


- the build quality is perfect: the rotary switch is top, as well as the button design and button feeling when pressing


- best precision: no matter against which benchtop or handheld multimeter - you can trust it! (well, my Keysight U1273A is also bang on!)


- best arrangement of the display and possibilities to switch values from the top to the bottom and vice versa, the way you need it (even better than the Keysight U1273A with its OLED and free arrangement, because you have more space!)


- own switch to power it on, so that you can leave the testleads in their plugs and the rotary switch in its position


- you can measure anything (apart from white LEDs in diode mode as 3.1V is max)

=> capacitance up to 100mF like the Rigol 3068/Siglent 3065
=> resistance up to 100MOhm like the Rigol 3068/Siglent 3065
=> low pass filter
=> LowZ
=> LowOhm
=> frequency up to 999.99kHz
=> 250µS to capture nearly any peak


- best prioritization such as measuring capacitance: as an LCR-meter is better, it is enough to have not endless digits such as the Keysight U1273A, with its flickering getting on my nerves


- easy to use with its F-Buttons, you even have a help-menu


- you can do everything in the settings: comma or point; dd-mm-yy or mm-dd-yy; any local time format; any backlight with its two brightness settings or power off timing you can imagine


- you can save ANY measurement and recall it immediately without pc or software and see it the same way as the real time measurement like a snapshot even with time and date, which is simply worth any penny of this DMM


- you could update the FW on your own (thank you, Fluke)


- the USB-IR-adapter has a fair price (thank you, Fluke)


- it works with any OS (thank you, Fluke)


- it measures fast enough in any setting and it is the fastest as far as capacitance is concerned due to its prioritization (see above)


- it could record any measurement with a graph (which is probably responsible for keeping this poor display, unfortunately...)





Cheers!  ;)

--- End quote ---

Metrix MTX3293 has all that and some...

USB IR you get with it (no additional purchase).
It has High voltage zener mode (28V) and goes to 100MΩ
LoZ voltage and low pass filter.
Single current socket for 10nA to 20A.
Frequency up to 5 MHz
AC BW 300kHz
PT100/1000 and thermocouple temp measurement
Support for current clamp and external shunt.
Power calc (W at specified impedance)
Power measurement mode (VxA)
Math
Graphical mode and logging.
Timestamped Min/Max
dBm and relative dB mode.
Charge while working.
Color screen

Peak mode is 500µs, it has several measurement modes etc etc...

But I agree 289 is very capable instrument. I only wish they would use better screen and if the graphing would be a bit faster..
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod