Products > Test Equipment
Inspection microscope with measurement capabilities
(1/1)
danils:
Hi all,

So I bought some days ago a Dino-Lite top end USB 3.0 digital microscope with its stand and I had severe compatibility issues with Windows 11 running under parallels on a M1 Mac, in a simple word: nothing did work properly. At the end I sent this overpriced stuff back. (almost 2000 euros)

So I am asking advice for something good with measurement capability software. Budget could be around 1000 euros.

Use is PCB inspection.

Thanks!

kripton2035:
when you use usb on a mac VM, with hardware devices behind, it's far better to use vmware fusion than parallels...
I was unable to connect some usb programmers some times ago, and it worked directly wit h fusion.
just my 2 cts.
ps: on an m1 mac this could be different as fusion is not completely tested it seems
timeandfrequency:
Hi danils,

Maybe you can check out the EAKINS IMX226 cam which embeeds a point to point distance and a circle diameter measuring feature. As a standalone device, no computer is required to use it : you just need a monitor with HDMI input and a basic USB mouse.
This newer model features a zoom control, additional measuring, recording and picture comparison tools and seems not to require any external lens. 
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod