EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: 2N3055 on July 01, 2016, 04:12:55 pm

Title: Is it possible to use Riglol to unlockDP831 PSU
Post by: 2N3055 on July 01, 2016, 04:12:55 pm
Hello !

I searched for quite a while and couldn't find any information whether Rigol DP831 can be unlocked with riglol same as DP832...
They share the same firmware and all...

Thanks for the answers !!

P.S. I'm new to the EEVblog so please be patient till I learn the ropes...  :phew:

Title: Re: Is it possible to use Riglol to unlockDP831 PSU
Post by: TurboTom on July 01, 2016, 11:15:04 pm
At least DP811 works. I guess that's true for all the DP800 series.

Cheers,
Tom
Title: Re: Is it possible to use Riglol to unlockDP831 PSU
Post by: 2N3055 on July 02, 2016, 07:54:02 pm
Thanks a lot Tom!!
If I find out for sure I will post the info...

Take care!!

Sinisa
Title: Re: Is it possible to use Riglol to unlockDP831 PSU
Post by: smile on December 29, 2016, 06:54:13 pm
Thanks a lot Tom!!
If I find out for sure I will post the info...

Take care!!

Sinisa

Well did i work on DP831?
Title: Re: Is it possible to use Riglol to unlockDP831 PSU
Post by: 2N3055 on December 29, 2016, 07:40:28 pm
Sorry for that, I forgot to post..

Yes, it worked flawlessly.. Also, I would recommend to put keys on a USB stick ( there is Rigol document explaining it), and just load them.. It is much easier than entering them trough DP UI...

Have a good one!!