| Products > Test Equipment |
| is Rigol DS1054Z still hackable ? |
| << < (4/30) > >> |
| Fungus:
--- Quote from: rhb on February 21, 2018, 04:21:07 pm ---If evaluations of scope performance before and after "hacking" are so common why have I never seen one? --- End quote --- Beats me. :popcorn: --- Quote from: rhb on February 21, 2018, 04:21:07 pm ---Provide a link. --- End quote --- The first couple of hits for a google search on these forums are: https://www.eevblog.com/forum/testgear/rigol-ds1054z-bandwidth/ https://www.eevblog.com/forum/testgear/pulse-generator-rise-time-and-rigol-ds1054z-bandwidth/ |
| Gandalf_Sr:
Wow, I actually read through all those links and here's my conclusions: 1. The DS1054Z already has a -3dB bandwidth of > 50 MHz unhacked 2. Most DS1054Zs have a -3dB bandwidth of ~135 MHz bandwidth-hacked 3. The DS1054Z is a lot of performance for not a lot of money 4. Some people just like to tell you that you're wrong about <insert any subject here> |
| Gandalf_Sr:
Just got back home after a vacation and my DS1054Z has arrived from Tequipment. Everything looks good, it came with 4 x PVP2150 probes, a power cord, USB cable, and manual. Mine is SW Vn 00.04.04.SP3 and board Vn 0.1.4. Everything has worked as expected, I'm a happy chappy. [EDIT] After applying DSER, the -3dB point seemed to be around 150 MHz on a straight coax BNC-BNC cable with generator and scope set to high impedance; there was a slight dip at 100 MHz but it came back up before falling again at 150 MHz. The scope was still usable to look at sine signals at 165 MHz. This was 1 channel only so 1 GSps. |
| ddd8130dr:
I just purchased the DS1054Z three days ago and tried using the rigol site to get the unlock key. When i tried it, I got an error message that the key was illegal. I followed the instructions a second time and got the same message. I cannot unlock my scope. running 04.04.SP3 Any suggestions???? |
| ebastler:
--- Quote from: ddd8130dr on April 23, 2018, 02:59:15 am ---I just purchased the DS1054Z three days ago and tried using the rigol site to get the unlock key. When i tried it, I got an error message that the key was illegal. I followed the instructions a second time and got the same message. I cannot unlock my scope. running 04.04.SP3 Any suggestions???? --- End quote --- Please see this thread for troubleshooting suggestions: https://www.eevblog.com/forum/testgear/ds1054z-hack-still-good/ In particular: - Make sure you do not misspell any letters when entering the serial number and key. - Refresh the RIGLOL web page and try to generate the key again. - Try another browser and try to generate the key again. - Download the executable for the key generator and run it locally. The serial number is also printed on a sticker on the scope's back -- easier to read than the small on-screen letters. |
| Navigation |
| Message Index |
| Next page |
| Previous page |