EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: 12321dk on January 03, 2017, 04:13:18 pm

Title: Is this a good multimeter?
Post by: 12321dk on January 03, 2017, 04:13:18 pm
I really need help here - is this a good multimeter to buy for 70€? It's used, almost new.

NEUMANN ST-9118T
http://www.neumann-messgeraete.at/ecommerce/product?category_id=344740&product_id=343956 (http://www.neumann-messgeraete.at/ecommerce/product?category_id=344740&product_id=343956)
Title: Re: Is this a good multimeter?
Post by: 3nigm4 on January 03, 2017, 04:39:08 pm
Another CEM rebranded: DT9918
Title: Re: Is this a good multimeter?
Post by: 12321dk on January 03, 2017, 07:40:36 pm
Is it good though? I can get the Brymen 233 for the same price, but the Brymen's min voltage of 600 mV worries me.
Title: Re: Is this a good multimeter?
Post by: Lightages on January 04, 2017, 12:11:24 am
Why would you get a BM233?

BM235
http://www.tme.eu/en/katalog/#search=bm235&s_field=accuracy&s_order=DESC (http://www.tme.eu/en/katalog/#search=bm235&s_field=accuracy&s_order=DESC)

or from Dave but he is out of stock right now apparently:
https://www.eevblog.com/product/bm235-multimeter/ (https://www.eevblog.com/product/bm235-multimeter/)

BM257S
http://www.tme.eu/en/katalog/#search=bm257s&s_field=accuracy&s_order=DESC&id_category=100164&page=1&currency=EUR (http://www.tme.eu/en/katalog/#search=bm257s&s_field=accuracy&s_order=DESC&id_category=100164&page=1&currency=EUR)
Title: Re: Is this a good multimeter?
Post by: 3nigm4 on January 04, 2017, 06:21:57 am
If you are looking for low Brymen prices here in europe, try with welectron.com
Keep in mind that all the BM2xx series has no Duty Cycle measure
Title: Re: Is this a good multimeter?
Post by: retiredcaps on January 04, 2017, 06:25:18 am
CEM Instruments has terrible or no quality control on their meters, either their own brand or when made for others.

Plenty of teardown photos on eevblog.  Just search for CEM.

Do you have a need to measure more than 600V?
Title: Re: Is this a good multimeter?
Post by: nugglix on January 04, 2017, 09:30:48 am
If you are looking for low Brymen prices here in europe, try with welectron.com

Thank you very much!
Looked for a bench DMM the last weeks, but this shop never turned up in my searches.

Just talked to them, they're very friendly - don't know about their english though. ;)

Things I learned:

 * their equipment sales branch is quite new, so this might be why I didn't see them on my searches
 * they're mainly (electronic) developers  -> they definitively have the potential to become a "go to" address
 * they're a offical Brymen distributor
 * they do have really good prices

On the negative side... I just placed an order...     one can't have enough  :-DMM

Do we have a thread where we collect (web-)shops for stuff like meters etc.?

Cheers
Title: Re: Is this a good multimeter?
Post by: 3nigm4 on January 04, 2017, 10:30:05 am
Thank you very much!
I'm glad to be of help :-+

On the negative side... I just placed an order...     one can't have enough  :-DMM
:-DD

Do we have a thread where we collect (web-)shops for stuff like meters etc.?
May be helpful, avoiding loosing hours in searching
Title: Re: Is this a good multimeter?
Post by: 12321dk on January 04, 2017, 03:56:40 pm
Why would you get a BM233?

I don't need the temperature or LoZ mode, and I dont think they are worth the 20€ price difference.

I'm looking for a general purpose, mostly electronics use multimeter.

Didn't know about the missing duty cycle on the brymens, but they are the cheapest quality multimeter (I kinda dont want to shell out more than 80 - 100€)
Title: Re: Is this a good multimeter?
Post by: 3nigm4 on January 05, 2017, 04:38:30 pm
Just to answer about ST-9118T, take a look at the EX530 thread, it is the same meter: https://www.eevblog.com/forum/testgear/multimeter-extech-ex530/msg176108/#msg176108 (https://www.eevblog.com/forum/testgear/multimeter-extech-ex530/msg176108/#msg176108)
Title: Re: Is this a good multimeter?
Post by: Gixy on September 21, 2017, 09:22:17 pm
I just ordered a BM257s to welectron.com and can confirm that their prices are cheaper than Amazon and they kindly offer a 5% rebate to eevblog members. Brymen DMM are delivered with silicon test leads, a Brymen pouch, and a warranty of 3 years. Marco is very reactive and arranging. Thumb-up!
Denis
Title: Re: Is this a good multimeter?
Post by: joeqsmith on September 22, 2017, 12:52:29 am
CEM Instruments has terrible or no quality control on their meters, either their own brand or when made for others.

I can't say a disagree with the above statement.  There is the Infinite monkey theorem. 
https://en.wikipedia.org/wiki/Infinite_monkey_theorem

I have had three CEM DT9939.  The first was pretty nice.  Number two had several problems but again, I highly suspect someone who had no business owning a meter bought this one, tore it apart and then returned it.  The third one was again pretty nice.   

The first one I bought just turned five years old and has had a pretty rough life from being loaned out along with the abuse I put it through. 

https://youtu.be/Yih7D23z7vE



 
Title: Re: Is this a good multimeter?
Post by: YU2 on November 22, 2017, 05:49:23 pm
I just ordered a BM257s to welectron.com and can confirm that their prices are cheaper than Amazon and they kindly offer a 5% rebate to eevblog members. Brymen DMM are delivered with silicon test leads, a Brymen pouch, and a warranty of 3 years. Marco is very reactive and arranging. Thumb-up!
Denis
How did you got a discount did you git any discount code? I am also planning to buy 235 or 257s.
Title: Re: Is this a good multimeter?
Post by: xcube on November 22, 2017, 06:14:38 pm
you got a discount did you git any discount code? I am also planning to buy 235 or 257s.

Please search for member: Welectron  (https://www.eevblog.com/forum/profile/?u=127550)