Products > Test Equipment
Just ordered Aneng MH13 Insulation Resistance Meter. Any comments on the spec
firebie:
Hi!
Can anyone confirm that MH12 can measure at least (or less) 0.4MOhm on 250V range?
Thank you
Tjuurko:
--- Quote from: firebie on December 19, 2024, 11:49:13 am ---Can anyone confirm that MH12 can measure at least (or less) 0.4MOhm on 250V range?
--- End quote ---
250V: 0.400M...20.99G
firebie:
--- Quote from: Tjuurko on December 20, 2024, 02:53:04 am ---
--- Quote from: firebie on December 19, 2024, 11:49:13 am ---Can anyone confirm that MH12 can measure at least (or less) 0.4MOhm on 250V range?
--- End quote ---
250V: 0.400M...20.99G
--- End quote ---
Was this tested on actual device? At least the lower part?
Tjuurko:
--- Quote from: firebie on December 20, 2024, 07:22:56 am ---Was this tested on actual device? At least the lower part?
--- End quote ---
The real device, I was interested to know the real limits of measurement on all ranges.
If the resistance is less than 0.4MOhm, then "0" will be displayed on the screen.
In general, the smallest measured resistance at the limit of 250V in other devices will be about 0.25MOhm (I=~1mA).
firebie:
--- Quote from: Tjuurko on December 20, 2024, 08:32:16 am ---The real device, I was interested to know the real limits of measurement on all ranges.
--- End quote ---
Could you share your findings for all ranges of MH12?
Thank you
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version