| Products > Test Equipment |
| Keysight 34450A Help |
| (1/1) |
| Louis_C:
Hello all. I'm looking for some help on a Keysight 34450A. All calibration tests pass except for 100mV AC @ 100kHz. It reads 94.837. The Low limit is 96.700 and the high is 103.3. I tried performing the internal calibration and entering the new corrected reading for this test point and the unit rejects it and fails. I flashed the firmware to the latest version available ( 01.03-01.02). I'm not sure what else to do here. Can anyone give me some advice as to what to look at next? Thanks! |
| Simon:
DO NOT DOUBLE, TRIPLE....... POST. EVERYONE WILL HATE YOU. |
| Navigation |
| Message Index |