Products > Test Equipment
Keysight / Agilent DIY Optical Serial adaptor
(1/1)
Fallenrecruit:
Couldn't find any info on here or anywhere to make a optical to serial adaptor for Keysight Handheld Dmm's so I decided to try my hand at making my own and it was surprisingly simple.
Currently looks horrible and I have plans to make it better looking and less scuff
Fallenrecruit:
Depending on the usb to serial adaptor used I have found the LED is connected between tx to Vcc, and Vcc set to 5v and on another adaptor I have it has to be connected tx to 3v3.
If unsure measure voltage between Gnd and TX and that will tell where to connect the led to
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod