| Products > Test Equipment |
| Keysight DMM - Yay or nay? |
| << < (21/22) > >> |
| mawyatt:
Hi Bram, I've disconnected everything for the network and just tried to use the Web Server. I can get to the KS34465A, but have to try a couple times, can ping it and get good results, KS LAN Status on KS indicates Good. However the mentioned error message (Application Error.....) appears on the KS screen in a window and can't be removed, but not on the Web Server screen at my computer. Can't figure out how to remove it on the KS screen without recycling power. This is the same result as when other devices are connected to network and they all work without any errors or error messages, so very annoying!! Keysight has provided no support so far, par for what others have indicated. We have a small 3 person research company, Wyatt Labs LLC, employees are me, myself and I :) Best, |
| Cerebus:
--- Quote from: mawyatt on March 07, 2022, 04:18:11 pm ---Hi Bram, I've disconnected everything for the network and ... --- End quote --- I'm going to follow this up over in the existing thread (https://www.eevblog.com/forum/testgear/web-issue-with-ks34465a/msg4032790/#msg4032790) to avoid sidetracking this thread more. |
| Domitronic:
--- Quote from: Hydron on March 06, 2022, 01:14:48 pm --- - buying one supports Danaher (though I'd not want to support KS's new business model right now either) --- End quote --- It is Fortive now. Was spun off from Danaher 5 or 6 years ago. |
| pope:
--- Quote from: Traceless on March 02, 2022, 12:32:19 am ---Thanks to everyone for the feedback so far. @Kleinstein, @Cerebus, @bob91343: I do know that DMM capacitance mode is not the holy grail, for me it is merely a convenience function. For instance when I do replace caps I like to do a quick and dirty check on the replacement cap just to see if capacitance is in the right ball-park. I already own a proper LCR-Meter (Matrix MCR-5200), but for simple stuff like that I tend to just use the DMM and don't bother to grab the LCR-leads out of the drawer and hook them up. --- End quote --- Sorry for the off-topic but how do you like the mcr-5200? |
| Joop01:
--- Quote from: Traceless on March 02, 2022, 08:09:35 pm --- --- Quote from: Markus2801A on March 02, 2022, 01:09:43 pm ---I just want to bring in the GW-Instek GDM-906x Series with two types namely GDM- GDM-9060 and the GDM-9061 What do you guys think of them? --- End quote --- Hey Markus, thanks for bringing these meters to my attention. I took a quick look at the GDM-9061's specs and it seems that the Siglent SDM 3065X is more accurate, also the Siglent has 2200000 counts vs the 1200000 counts of the GWInstek plus the GDM-906x models seem to be more expensive. Unless the GWInstek has some trick up its sleeve that I missed while skimming over the specs the SDM 3065X would be the better option. --- End quote --- I'm busy with my choice. I do audio, so ACV or better said the standard 0.775V or the reference 0dBu. The Siglent SDM 3065X has in the end an error of +/-0,16% for measuring 0.775V. The Gw-Instek GDM-9061 has a calculated error of +/- 0,10% for measuring 0.775V. The difference has much to do with the range you have to use. With Siglent this is 2 Volt and with Gw-Instek it is 1 Volt. So counts does not say it all. |
| Navigation |
| Message Index |
| Next page |
| Previous page |