| Products > Test Equipment |
| Keysight's new 34465A (6.5 digit) and 34470A (7.5 digit) bench multimeters |
| << < (43/145) > >> |
| LA7SJA:
--- Quote from: 6thimage on March 20, 2015, 01:02:49 pm ---I have had an update about the 34461A's firmware: --- Quote from: Keysight ---Unfortunately the firmware release has been delayed until further notice as the engineers are performing some additional tests to make sure the firmware works as per the expectations --- End quote --- This has come from their contact centre, so I think "to make sure the firmware works as per the expectations" means they found a pretty significant bug in it. If they are fixing a bug, then it might delay the release further - as I get the impression that their firmware testing procedure takes a while to run. --- End quote --- The update has arrived :-+ 2015-03-16 2.08 Update to add additional 34460A/34461A functionality and fix miscellaneous 34460A/34461A/34465A/34470A defects. I have not installed this yet, I thought I should notify the forum first! JFG |
| dadler:
Updated. |
| LA7SJA:
#dadler Have you tried the dual display on DCV with ACV as secondary? JFG |
| HighVoltage:
The new FW 2.08 seems to work perfect on my 34461A and 34470A No update issues at all. |
| HighVoltage:
Here are two pictures after the FW update to v2.08, in comparison to a 33461A with the FW v1.10 Top instrument: 34461A, FW v1.10 Middle instrument: 34461A, FW v2.08 Bottom instrument: 34470A, FW v2.08 It seems the trend-chart received a higher resolution (one more digit) on the 34461A, which is really nice, to say the least. All three instruments are set to the same setting and on the same voltage source The dual display works excellent on the 34461A |
| Navigation |
| Message Index |
| Next page |
| Previous page |