Products > Test Equipment
Keysight's new 34465A (6.5 digit) and 34470A (7.5 digit) bench multimeters
<< < (121/145) > >>
0xfede:

--- Quote from: LA7SJA on November 23, 2017, 06:27:34 pm ---I regret to inform you that the "release instrument after download" feature works perfect on my
34461A A.02.14-02.40-02.14-00.49-01-01 (latest firmware)
22.11.2017  22:32            43 008 KEYSIGHT DMM plot.exe
28.08.2014  13:56           296 448 ZedGraph.dll

Johan-Fredrik

--- End quote ---

But still the command fails on blackdog instrument. Maybe the issue is related to a particular firmware version?
Nevertheless I'm attaching a new version with various fixes and a few addon.

Best,
0xfede

LA7SJA:
The release after download only works from [Download Data] and not [Download Screenshot] but the latest version now have full screenshot on screen.
Telnet on port 5024 or 5025 when testing commands?

Johan-Fredrik
blackdog:
Hi,

Nice, PictureViewer shows the hole picture before saving the picture!

Just another picture to show my thanks  ;D


Kind regards,
Bram
0xfede:

--- Quote from: LA7SJA on November 23, 2017, 07:30:02 pm ---The release after download only works from [Download Data] and not [Download Screenshot] but the latest version now have full screenshot on screen.
Telnet on port 5024 or 5025 when testing commands?

Johan-Fredrik

--- End quote ---

The release after download function is only on download data since it clears the memory buffer. I know this is not elegant but this is the only way to download both picture and data. Maybe we should think a different approach? I'm open to suggestion :)
Telnet is on port 5024 as for the majority of Keysight products.


--- Quote from: blackdog on November 23, 2017, 08:10:09 pm ---Hi,

Nice, PictureViewer shows the hole picture before saving the picture!

Just another picture to show my thanks  ;D
......

Kind regards,
Bram

--- End quote ---

Glad that you like it!
Messtechniker:

--- Quote from: 0xfede on November 23, 2017, 08:44:37 pm --- I'm open to suggestion :)

--- End quote ---

Reading the memory like in your program is basically a good idea, in particular when
wanting to save data after a measurement run has been completed.

Maybe you would want to log the data into your graph in real time (i.e. full remote control)
by sending the command "Read?" to the 3446x every second and recording its response.
This would give you control over the timebase. My Profilab program does this. But this program
can only communicate via a virtual COM port on the PC since this program does not offer a ready made
tcp communication module.  :(.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod