Hi there,
for a hobby project I'm working on, I recently bought some Agilent N5302A chassis, a N5306A PCIe Analyzer board and some N5315A-A04 passive probe on Ebay.
After having messed around with the Software for quite some time, I got it to boot using DHCP and FTP hosted on an old WindowsXP machine. So far so good.
However, it seems I'm lacking some kind of license to go along with it.
When I start the Protcol Analyzer software and am about to start capture, I get an error dialog saying "Unable to start analyzer: Port handle is invalid. Module 101 is not licensed for Protocol Analysis at current port speed."
This is regardless of which link speed I'm using, which probe type I select, etc.
Now I'm wondering whether I'm missing some license to be installed on my local machine, despite the hints Alex has given in
https://www.eevblog.com/forum/testgear/agilent-n5306a-pcie-protocol-analyzer/msg1199751/#msg1199751.Unfortunately, he hasn't been around in years.
Does anyone know if
a) there's indeed a license file needed
b) the module I have might be unsuitable (even though it is an N5306A PCIe Analyzer and was declared as such on Ebay, its back has a sticker labeled "Protocol Analyzer for Infiniband x12 enabled", whereas others read e.g. "x8 Analyzer for PCIE 5Gb/s")
c) there are still possibilities in retrieving a key directly from Keysight, despite it's been discontinued already some years ago and I have no original documents such as order etc.
d) alternatives do exist? (I briefly looked at the software but this seems a humongous venue to reverse)
Thanks in advance!
BR Thomas