| Products > Test Equipment |
| Lab bench power supply - Keysight or Rigol or GW Instek ?? |
| << < (3/5) > >> |
| J-R:
I've found Keysight great to work with and I like my E36313A, but it is a lot more money compared to the other options so that is probably why it wasn't in the original list. |
| thm_w:
- EDU36311A is weak at 90W. Should be fine if you are doing only digital stuff, but, if you plan to work on any powerful motors it would be a no-go. - DP832 keypad is actually fine, but the unit is older and dated at this point, you can get better value and a bigger screen from other models. - E36313A is probably out of budget for OP ($2200) UDP3305S-E or one of the new Siglent PSUs is what I would be considering: https://www.eevblog.com/forum/testgear/new-siglent-spd4000x-series-power-supply/ |
| PavelKCZ:
Hi, of course, I examined the R&S instruments. In fact, it is my dream to own something with R&S logo. But the price is prohibitive. I am buying this PS for my private use as a hobby instrument. Not for profit, not for RD department of my company. Best regards PavelKCZ P.S. Já bych možná něco snad i koupil, ale nesměl by to být přelakovaný Hameg :) |
| PavelKCZ:
It seems that I already decided for Instek. It is really a gem, sold almost for twice the Instek price rebranded as a Teledyne-LeCroy instrument. :) https://www.conrad.cz/cs/p/teledyne-lecroy-t3ps43203p-laboratorni-zdroj-s-nastavitelnym-napetim-0-32-v-0-3-a-212-w-lze-programovat-pocet-vyst-1947394.html Best regards PavelK |
| PavelKCZ:
I am sure that E36313A is a really good PSU. But the price tag is far to high for a good power supply in a private cave, used just for hobby purposes. Best Regards PavelKCZ |
| Navigation |
| Message Index |
| Next page |
| Previous page |