Products > Test Equipment

Latest addition: A Tektronix TLA715 Logic Analyzer- pending shipment

<< < (4/4)

alexian79:
I recently picked up TLA715 from ebay, in not booting condition(stuck on WIN2000) boot screen.
It came with TLA7AA1 and TLA7PG2 modules and P6810 probe.
I did changed HDD and updated to Windows XP. and installed 5.1 TLAtools
Problem is that it does not connect to the probe. I tested 3 different probes(picked up from ebay) and have same error. I am waiting for new TLA7AA4 module to test against that.
I have never used such device before so don't know what to expect, and how to use it. Any suggestion very appreciated.

alexian79:
Maaaan, as soon as I posted I have found the issue, I was connection probes channel label up, and that was wrong, it is actually other way around, I had a feeling that it was not connecting well.

dietert1:
We used to have a modular analyzer to be run inside a VXI crate. The best thing about these are the TVS621 TVS625 and TVS645 digital scope plugins. For example a four channel scope with 5 Gsps can now be had for about $ 1K. Don't know whether it fits into a TLA715.

Regards, Dieter

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod