Products > Test Equipment

LCR Meter Recommendation

<< < (6/12) > >>

BillyO:

--- Quote from: KungFuJosh on November 03, 2024, 04:00:20 pm ---That might be okay if it works and there's nothing wrong with it.

--- End quote ---

It's fully tested and has a 2021 calibration.  The company no longer existing and no known manual on-line gives me some concern.  But 0.02% basic accuracy is attractive.

Plus I know and trust the people I'm getting it from.

Smokey:
Having DC bias capabilities for capacitors was something I was always missing from the handheld and cheap bench LCRs.  You don't realize how much capacitance drops off until you can measure with the actual DC bias.  That's a must have on my LCR feature list now.

BillyO:

--- Quote from: Smokey on November 03, 2024, 11:21:41 pm ---Having DC bias capabilities for capacitors was something I was always missing from the handheld and cheap bench LCRs.  You don't realize how much capacitance drops off until you can measure with the actual DC bias.  That's a must have on my LCR feature list now.

--- End quote ---
The Protek Z9218 has that ability.

BillyO:
Oh, BTW, I have found the TH2832 .. sort of

https://www.gsi-protek.com/9216a-1

The Protek 9216B seems to have the same spec, same software (from looking at the screen) and the same physical layout and look.  Just 3,355,000 Korean Won ($2600).  I wonder if they bought the rights off Tonghui or did they OEM it for them?

So Protek are still around.  They have just withdrawn from the Western market.



Then there is this too..

https://en.tonghui.com.cn/product/TH2830TH2832-419.html

Seems they have changed the name from Tonghui to TEKMIZE but it seems to be still available.  :-//

KungFuJosh:

--- Quote from: BillyO on November 03, 2024, 11:00:42 pm ---
--- Quote from: KungFuJosh on November 03, 2024, 04:00:20 pm ---That might be okay if it works and there's nothing wrong with it.

--- End quote ---

It's fully tested and has a 2021 calibration.  The company no longer existing and no known manual on-line gives me some concern.  But 0.02% basic accuracy is attractive.

Plus I know and trust the people I'm getting it from.

--- End quote ---

Would they sell it for $200? 😉

Can you run some tests before you buy it?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod