EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: Faringdon on December 06, 2022, 07:40:55 pm
-
Hi,
Does any body have a quik start guide or vid for this?
We searched but manual not that readable.
Just want to set basic constant resistance.
And make sure power limit is above 120W
-
https://resources.aimtti.com/manuals/LD400+LD400P_Instruction_Manual-Iss4.pdf
Manual seems fairly readable to me. Has A and B level modes, and an enable.
From the main screen:
- Press the Mode softbutton, then select "CR" constant resistance.
- Press the Levels softbutton, set levels, or none to disable.