Author Topic: LeCroy LS140 oscilloscope information  (Read 2874 times)

0 Members and 1 Guest are viewing this topic.

Offline malchTopic starter

  • Regular Contributor
  • *
  • Posts: 86
  • Country: ca
LeCroy LS140 oscilloscope information
« on: March 02, 2015, 04:10:59 am »
Any opinions on LeCroy LS140 scope from past users?
Slim pickings for info on the net. Free bare schematics with NO parts placement.
No service manual free or paid.
It seems to be manufactured after the 9400 series and before the 9300 series.  :)
 

Offline Wuerstchenhund

  • Super Contributor
  • ***
  • Posts: 3088
  • Country: gb
  • Able to drop by occasionally only
Re: LeCroy LS140 oscilloscope information
« Reply #1 on: March 02, 2015, 06:12:01 am »
Any opinions on LeCroy LS140 scope from past users?
Slim pickings for info on the net. Free bare schematics with NO parts placement.
No service manual free or paid.
It seems to be manufactured after the 9400 series and before the 9300 series.  :)

If I remember right the LeCroy ScopeStation LS140 was produced from 1987 to 1998. It was LeCroy's mid-range model (later replaced by the WaveRunner LT) while the 9300 Series was LeCroy's high-end. The ScopeStation also shares hardware (and the OS, DOS?) with the LW410/420 Series of Arbitrary Waveform Generators.

You're right that there isn't much information about these scopes out there.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf