Products > Test Equipment
Lecroy WavePro 950 mini teardown
<< < (4/5) > >>
Ice-Tea:
So, I replaced the rotary with one from a SDA-6020, worked fine... here. I sold the unit and shipped it, now the customer says the rotary is still eratic. And two others as well (that I probably just missed). Does anyone have any experience with those? Any source to get them new? Any other reason why they might be behaving badly?
xemax:
I found this for the encoders:
https://groups.yahoo.com/neo/groups/LeCroy_Owners_Group/files/Encoder Info LT WR1 and WR2/


Another question:
Is the sample memory part of the SDRAM? Or is it separate memory for the options "WavePro M/L/VL/XL"?
grumpydoc:

--- Quote from: xemax on December 24, 2017, 08:42:28 am ---I found this for the encoders:
https://groups.yahoo.com/neo/groups/LeCroy_Owners_Group/files/Encoder Info LT WR1 and WR2/


Another question:
Is the sample memory part of the SDRAM? Or is it separate memory for the options "WavePro M/L/VL/XL"?

--- End quote ---
It's on the acquisition board, integrated with the ADC module AFAIK.
xemax:
I doesn´t found specs for the HAM631 ADC in the WavePro.

In the service manual of the LTxxx scope i found this:
HAM631 : Hybrid ADC 1 GS/s with 4Mb memory

The HAM631 in the WavePro must have 4 GS/s with unknown memory.

The sample memory options for WavePro 950 are:
    1Ch 2Ch 3-4Ch Standard1M500k250kWavePro M4M2M1MWavePro L16M8M4MWavePro VL32M16M8M
If i activate the WavePro L option do i have more sample memory?
analogRF:
grumpydoc, did you ever try overclocking the cpu? or did you at least find out how to? I would like to do it on my WavePro 960 which i think uses the same cpu board as your 950
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod