EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: darkstar49 on June 19, 2018, 09:59:10 pm
-
Anyone ever saw this ?? Got it only on CH1 & 2, 3 & 4 are OK.
If anyone has hints/ideas, they're welcome !!
https://youtu.be/dwMPp9JilgI
-
Vdig and Idig seem like measurement thresholds of some kind. Decode or just Measurements is what I'd suspect.
Can you do a set to Default and get rid of them ?
-
Nope... that’s somehow my problem...
Cursors are all off, as well as all measurements... and this is mentioned absolutely nowhere...
My fear is that some values are above acceptable thresholds, and that this is the reason these are shown... ?
I’ll try to get in touch with Lecroy also...
-
Hi,
I watched the Video, but i'm not really sure what strange behavior you are seeing here.
Do you mean the Labels IDIG / VDIG?
These are Labels that can normaly be enabled in the Channel Setup, see the attached picture.
BR
Kai
-
If that's it, you've earned a bottle champaign !!! (serious !)
And I should probably be ashamed for the next 10 years... :palm:
It's probably a shame, but I NEVER EVER used labels...
Will let you know when I'm back home...