Products > Test Equipment
LeCroy WaveRunner 6000(A) LCD
(1/1)
darkstar49:
nothing groundbreaking, but as I was just busy replacing the motherboard of 2 6100A's (with some from Kontron), I though I'd publish the SDVO/LCD pinout, for those who'd need to make their custom LVDS cable, too...
I used a 20-wires pre-crimped cable, but some other LCD's/mainboards may require a different number of wires.

the LCD connector on the front panel board of the (A) series is compatible with a Hirose DF19-20 connector, the backlight (inverter) connector (on the cable) is JST S5B-PH 5-pin female connector (I didn't use it, and soldered the power supply lines from the motherboard onto the wires directly)
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod