Author Topic: List your test equipment "scores" here!  (Read 774996 times)

0 Members and 2 Guests are viewing this topic.

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 9057
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: List your test equipment "scores" here!
« Reply #1150 on: February 02, 2017, 04:49:23 pm »
Nice free one saved from going in the junk box.  Look @ ze ol' one going head to head with a GPSDO !!  that can't be right :)

An excellent freebie, indeed! :-+
TEA is the way. | TEA Time channel
 

Offline Ysjoelfir

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: de
Re: List your test equipment "scores" here!
« Reply #1151 on: February 02, 2017, 06:52:32 pm »
I went to a local flea market and picked up two of those beautys for only 50 bucks after haggling!!! :wtf: Just slightly scratched but overall in a very good condition! They were laying in a basket with mostly broken stuff like plates and cups and I only took a look because there was a test lead hanging out of the basket. :scared: :phew:



But why did those appear AFTER I have bought myself a Keysight DMM for around five times that much last week?  :palm:
Greetings, Kai \ Ysjoelfir
 
The following users thanked this post: AF6LJ

Offline bitseeker

  • Super Contributor
  • ***
  • Posts: 9057
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: List your test equipment "scores" here!
« Reply #1152 on: February 02, 2017, 07:13:10 pm »
Wow, that's quite a score (double-score). So, keep one and sell one to offset your much-more-expensive Keysight DMM?
TEA is the way. | TEA Time channel
 

Offline PointyOintment

  • Frequent Contributor
  • **
  • Posts: 327
  • Country: ca
  • ↑ I scanned my face
Re: List your test equipment "scores" here!
« Reply #1153 on: February 03, 2017, 02:48:58 am »
Well here it is - nice bright display, seems to be in good condition. The white faceplate on the right side is a little yellowed, typical of of something that has been close to a window, but I can easily fix it with some peroxide the next time the sun is shining.  :clap:

Edit: Firmware is v2.2

[GW Instek GDM-8251A] Have you determined yet if it measures voltage and current simultaneously or interleaved?
I refuse to use AD's LTspice or any other "free" software whose license agreement prohibits benchmarking it (which implies it's really bad) or publicly disclosing the existence of the agreement. Fortunately, I haven't agreed to that one, and those terms are public already.
 

Offline VK5RC

  • Supporter
  • ****
  • Posts: 2672
  • Country: au
Re: List your test equipment "scores" here!
« Reply #1154 on: February 03, 2017, 11:35:09 am »
Nice free one saved from going in the junk box.  Look @ ze ol' one going head to head with a GPSDO !!  that can't be right :)



Update ... it started showing 10000.000 !!! WHAAAT !!! That is crazy  :-+
A great save, I like the large LED displays esp if done well with the right shade of perspex in front of the LED to reduce glare etc, I find so much more readable than LCD and just a bit better than fluorescent.
Whoah! Watch where that landed we might need it later.
 

Online xrunner

  • Super Contributor
  • ***
  • Posts: 7485
  • Country: us
  • hp>Agilent>Keysight>???
Re: List your test equipment "scores" here!
« Reply #1155 on: February 03, 2017, 02:49:49 pm »
[GW Instek GDM-8251A] Have you determined yet if it measures voltage and current simultaneously or interleaved?

Yea I just tried a DVC & DCA test, its interleaved, takes both a voltage and current measurement each second.
I told my friends I could teach them to be funny, but they all just laughed at me.
 

Offline TAMHAN

  • Frequent Contributor
  • **
  • Posts: 407
  • Country: sk
Re: List your test equipment "scores" here!
« Reply #1156 on: February 04, 2017, 01:29:20 am »
Kikusui DC Load. Not exactly cheap due to shipping and import cost, but well needed  :box: :box:
Feel like some additional tamile wisdom? Visit my YouTube channel -> https://www.youtube.com/user/MrTamhan for 10min tid-bits!
 

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 26682
  • Country: nl
    • NCT Developments
Re: List your test equipment "scores" here!
« Reply #1157 on: February 04, 2017, 01:48:48 am »
Kikusui DC Load. Not exactly cheap due to shipping and import cost, but well needed  :box: :box:
Which model? Photos? I was eyeballing some older Kikusui DC loads but decided not to buy them. Maybe that was a mistake... or not...
« Last Edit: February 04, 2017, 01:50:19 am by nctnico »
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 

Offline Jester

  • Frequent Contributor
  • **
  • Posts: 859
  • Country: ca
Re: List your test equipment "scores" here!
« Reply #1158 on: February 04, 2017, 03:39:17 pm »
I have two Kikusui DC Loads. I'm a fan of this old school equipment in that you turn it on, and its ready to use immediately, and you don't have to hunt around a keypad when setting a value. Very simple to use 10 turn pot to adjust desired current level.

I retrofitted the smaller PLZ 72W I have with a cheap eBay dual display so I can see load voltage and current simultaneously. The larger Kikusui load I have already had dual displays. My only complaint is that the fan is a bit noisy.

I'm still considering picking up one of the more modern Maynuo DC loads.
 

Offline Ysjoelfir

  • Frequent Contributor
  • **
  • Posts: 542
  • Country: de
Re: List your test equipment "scores" here!
« Reply #1159 on: February 04, 2017, 04:21:26 pm »
Wow, that's quite a score (double-score). So, keep one and sell one to offset your much-more-expensive Keysight DMM?
That would be an option. But... hmm.. That would mean that I would have to sell Test Equipment :O Impossibru!
Greetings, Kai \ Ysjoelfir
 

Online xrunner

  • Super Contributor
  • ***
  • Posts: 7485
  • Country: us
  • hp>Agilent>Keysight>???
Re: List your test equipment "scores" here!
« Reply #1160 on: February 04, 2017, 05:40:51 pm »
Picked up a very nice HP 3468B. Has the battery option but of course the battery is dead and I have no intention of replacing it (but I am removing it). Nonetheless, it's in great condition and satisfies my desire to collect more DMMs than I have any real need for.  :)
I told my friends I could teach them to be funny, but they all just laughed at me.
 

Offline guenthert

  • Frequent Contributor
  • **
  • Posts: 702
  • Country: de
Re: List your test equipment "scores" here!
« Reply #1161 on: February 04, 2017, 07:26:23 pm »
Nice free one saved from going in the junk box.  Look @ ze ol' one going head to head with a GPSDO !!  that can't be right :)



Update ... it started showing 10000.000 !!! WHAAAT !!! That is crazy  :-+
Congratulations to your HP5328B with option 010.  I'd think you must have the oven stabilized oscillator option (unless you 'timed' the picture just right ;-) , as the standard oscillator is just so-so (TC of 2.5ppm/C).  I don't mind, as my 5328A is fed a reference clock from a GPSDO.  And yes, short term, there's no reason why an ovenized oscillator shouldn't be able to compete with a GPSDO (after all, that's what they use too).
 

Offline apelly

  • Supporter
  • ****
  • Posts: 1061
  • Country: nz
  • Probe
Re: List your test equipment "scores" here!
« Reply #1162 on: February 04, 2017, 09:42:09 pm »
I know of at least 2 probe Asian probe manufacturers
Prove it  :)
 

Offline tautech

  • Super Contributor
  • ***
  • Posts: 28058
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: List your test equipment "scores" here!
« Reply #1163 on: February 04, 2017, 09:53:46 pm »
I know of at least 2 probe Asian probe manufacturers
Prove it  :)
When you drop by for that shoot we talked about I will, but not publically, I need to protect my product sources and some small commercial advantage.  ;)

A bit of time spent x referencing what's available on eBay and Aliexpress and from manufacturers will find them too.
In fact I'll raise that to 3.  :P
Avid Rabid Hobbyist
Siglent Youtube channel: https://www.youtube.com/@SiglentVideo/videos
 
The following users thanked this post: apelly

Offline Berni

  • Super Contributor
  • ***
  • Posts: 4910
  • Country: si
Re: List your test equipment "scores" here!
« Reply #1164 on: February 04, 2017, 11:41:26 pm »
Scored this Tektronix CSA907T Pattern generator for 40 bucks.

Teardown thread: https://www.eevblog.com/forum/testgear/tektronix-csa907t-pattern-generator(700mbit)-teardown-and-repair/



 

Offline calin

  • Regular Contributor
  • *
  • Posts: 238
  • Country: us
Re: List your test equipment "scores" here!
« Reply #1165 on: February 05, 2017, 02:48:00 am »


Quote
Congratulations to your HP5328B with option 010.  I'd think you must have the oven stabilized oscillator option (unless you 'timed' the picture just right ;-) , as the standard oscillator is just so-so (TC of 2.5ppm/C).  I don't mind, as my 5328A is fed a reference clock from a GPSDO.  And yes, short term, there's no reason why an ovenized oscillator shouldn't be able to compete with a GPSDO (after all, that's what they use too).
Yes it has two options installed, 001 which is the OCXO and 050 which is the 1.3GHz C channel and DVM. the DVM part is a tad off compared to my FLUKE meter but seem to be able to measure voltage on the other input channels that go to 100Mhz , I wonder if it really measures AC at that frequency, that would be pretty slick... Time to RTFM i guess. [/size]Now only if this thing wold not take up a quarter of my bench.... But that may be solved by letting it to take off and fly .. it sounds like a jet plane ready to take off :) .

 

Offline Berni

  • Super Contributor
  • ***
  • Posts: 4910
  • Country: si
Re: List your test equipment "scores" here!
« Reply #1166 on: February 05, 2017, 09:16:26 am »

Yes it has two options installed, 001 which is the OCXO and 050 which is the 1.3GHz C channel and DVM. the DVM part is a tad off compared to my FLUKE meter but seem to be able to measure voltage on the other input channels that go to 100Mhz , I wonder if it really measures AC at that frequency, that would be pretty slick... Time to RTFM i guess. [/size]Now only if this thing wold not take up a quarter of my bench.... But that may be solved by letting it to take off and fly .. it sounds like a jet plane ready to take off :) .

That just means you need a bigger bench or maybe a 19 inch rack. ;D I quite like having a slightly raised shelf behind by bench for keeping the test gear on.

I also like to change out any loud fans in my test equipment. The AC induction motor fans used in some old test gear are loud as heck, tho they do also move an insane amount of air. But something like this probably doesn't need that much air flow.
 

Offline AF6LJ

  • Supporter
  • ****
  • Posts: 2902
  • Country: us
Re: List your test equipment "scores" here!
« Reply #1167 on: February 05, 2017, 06:33:11 pm »
Picked up an HP-8640 yesterday at the Palm Springs Hamfest.
Only problem is the counter int/ext switch is broken but the last owner wired it into the internal position.
Since I have two counters this is no big deal...
Hundred Bucks, not bad....
Sue AF6LJ
 

Offline PaulAm

  • Frequent Contributor
  • **
  • Posts: 938
  • Country: us
Re: List your test equipment "scores" here!
« Reply #1168 on: February 05, 2017, 10:18:39 pm »
Stacking order is very important!  That looks like a 5245L under the 8640.
 
The following users thanked this post: AF6LJ

Online xrunner

  • Super Contributor
  • ***
  • Posts: 7485
  • Country: us
  • hp>Agilent>Keysight>???
Re: List your test equipment "scores" here!
« Reply #1169 on: February 05, 2017, 11:04:34 pm »
Stacking order is very important!  That looks like a 5245L under the 8640.

Looks like the stack can go a little higher yet ...  :popcorn:
I told my friends I could teach them to be funny, but they all just laughed at me.
 
The following users thanked this post: AF6LJ

Offline Cubdriver

  • Supporter
  • ****
  • Posts: 4201
  • Country: us
  • Nixie addict
    • Photos of electronic gear
Re: List your test equipment "scores" here!
« Reply #1170 on: February 05, 2017, 11:59:09 pm »
Stacking order is very important!  That looks like a 5245L under the 8640.

It is indeed.

-Pat
If it jams, force it.  If it breaks, you needed a new one anyway...
 

Offline AF6LJ

  • Supporter
  • ****
  • Posts: 2902
  • Country: us
Re: List your test equipment "scores" here!
« Reply #1171 on: February 06, 2017, 03:50:56 am »
Stacking order is very important!  That looks like a 5245L under the 8640.

Looks like the stack can go a little higher yet ...  :popcorn:
I may have to reinforce the floor There is some more HP Iron in my future.
That is a project to talk about on another day.
The generator works... As noted above the counter switch is hardwared in the int position...
I wonder if someone makes copies of all those plastic gears.......
Sue AF6LJ
 

Offline AF6LJ

  • Supporter
  • ****
  • Posts: 2902
  • Country: us
Re: List your test equipment "scores" here!
« Reply #1172 on: February 06, 2017, 03:53:24 am »
Stacking order is very important!  That looks like a 5245L under the 8640.

It is indeed.

-Pat
It works best there...
Besides that thing is almost as heavy as the 8640...
Sue AF6LJ
 

Offline Cubdriver

  • Supporter
  • ****
  • Posts: 4201
  • Country: us
  • Nixie addict
    • Photos of electronic gear
Re: List your test equipment "scores" here!
« Reply #1173 on: February 06, 2017, 04:19:25 am »
I wonder if someone makes copies of all those plastic gears.......

There's a guy on the HP mailing list that was selling brass replacements for it, but they were around $200 for the set, so I decided to roll the dice and hope the ones in mine stay together.  I can dig back and try to find his contact info if you'd like.

Conrad Hoffman has made cast replacements:
http://conradhoffman.com/HP8640B_gears.htm

And there was someone on E-bay a while back also selling cast resin ones, but I can't find anything with a quick search at this point.

FWIW...

-Pat
If it jams, force it.  If it breaks, you needed a new one anyway...
 
The following users thanked this post: AF6LJ

Offline AF6LJ

  • Supporter
  • ****
  • Posts: 2902
  • Country: us
Re: List your test equipment "scores" here!
« Reply #1174 on: February 06, 2017, 12:57:24 pm »
I wonder if someone makes copies of all those plastic gears.......

There's a guy on the HP mailing list that was selling brass replacements for it, but they were around $200 for the set, so I decided to roll the dice and hope the ones in mine stay together.  I can dig back and try to find his contact info if you'd like.

Conrad Hoffman has made cast replacements:
http://conradhoffman.com/HP8640B_gears.htm

And there was someone on E-bay a while back also selling cast resin ones, but I can't find anything with a quick search at this point.

FWIW...

-Pat

Thanks Pat...
I'll pass on the brass, That is a bit pricey for me. 
The castings have my interest.....
Thank You.
Sue AF6LJ
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf