Products > Test Equipment

List your test equipment "scores" here!

<< < (512/581) > >>

nctnico:

--- Quote from: Ice-Tea on September 20, 2019, 12:35:47 pm ---
--- Quote from: nctnico on September 20, 2019, 11:30:51 am ---I just pulled the trigger on oscilloscope number 15 (if I got the count right)... this time it is a Lecroy Wavepro 7200A in 'for parts' condition for $400 on Ebay. Looks complete from the pictures but the front bezel is broken. See what the mailman drags in. This would be my first real (not rebadged) Lecroy oscilloscope.

(Attachment Link)

The display doesn't work so I hope the VGA output on the rear shows some signs of life.

--- End quote ---
I'm interested in that bezel, regardless of the state.

Display: got two of them (kinda) a while a go, both with bad CCFL tubes. Should have VGA in that case.

--- End quote ---
If it is just the CCFL then it will be a simple fix. I have a few CCFL to LED conversion kits somewhere so I could put these to good use. Fingers crossed. I'm not looking for a big fixer-upper project right now but could use the bandwidth for an ongoing project.

Can't help with the bezel though; I'd like to keep it. I can probably glue it together.

lukier:

--- Quote from: nctnico on September 20, 2019, 11:30:51 am ---I just pulled the trigger on oscilloscope number 15 (if I got the count right)... this time it is a Lecroy Wavepro 7200A in 'for parts' condition for $400 on Ebay. Looks complete from the pictures but the front bezel is broken. See what the mailman drags in. This would be my first real (not rebadged) Lecroy oscilloscope.

--- End quote ---

Congrats! Recently I've also scored similar scope (DDA-3000 - essentially WP7300A), although not that cheap :) It came without the bezel entirely, so I had to go through the ordeal of 3D printing, gluing, poly putty, sanding, painting etc. Worked out, but not very pretty - my poor manual skills. (Big thanks to Mechatrommer for providing the 3D model).

I wouldn't worry about the display - you will probably want to upgrade the PC parts and put new XGA panel (like I did) or even iPad Retina panel anyway (see the big DDA3000 modding thread).

nctnico:
Why do I suddenly get the idea to mill a new bezel from wood?  >:D

2N3055:

--- Quote from: nctnico on September 20, 2019, 10:45:50 pm ---Why do I suddenly get the idea to mill a new bezel from wood?  >:D

--- End quote ---

LOL!! Deluxe edition...

Cubdriver:

--- Quote from: 2N3055 on September 20, 2019, 11:31:51 pm ---
--- Quote from: nctnico on September 20, 2019, 10:45:50 pm ---Why do I suddenly get the idea to mill a new bezel from wood?  >:D

--- End quote ---

LOL!! Deluxe edition...

--- End quote ---

Add some harvest gold tassels to frame the display, and you can go full-on 70s era pimped-out scope!

-Pat

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod