Products > Test Equipment

Lists of Rigol SCPI commands

<< < (3/4) > >>

RoGeorge:

--- Quote from: purpose on November 19, 2020, 02:21:49 pm ---Bump  8)

--- End quote ---

Please don't bump technical threads.

Try opening a new topic instead, or just use more refined Google searches.  For example put this in the search bar:

--- Code: ---DP800 calibration site:eevblog.com
--- End code ---
"site:eevblog.com" will ask Google to search inside the EEVblog.com website only.

The second search result is this doc file:  https://www.eevblog.com/forum/testgear/rigol-dp832-firmware-updates-and-bug-list/?action=dlattach;attach=120116 (from this reply https://www.eevblog.com/forum/testgear/rigol-dp832-firmware-updates-and-bug-list/msg556101/#msg556101 ).

purpose:
It was only a little bump. Nobody got seriously hurt.

I've been through every doc on the site, but found only one that mentions sense and that has nothing of any use.
Back to the grindstone.

RoGeorge:
The doc linked before has all the commands for calibrating the ADC and DAC, for both generating and measuring.  Those should be enough to perform any calibration, IMO.

That is why opening a new thread about the particular thing you are looking for makes sense.  You may want to explain there:
- what exactly are you trying to achieve
- why you don't like the results, why do you think they are wrong
- what you did/got so far, explained with screen captures and/or other performed measurements
- what are the results you were expecting but didn't get 

tv84:

--- Quote from: purpose on November 19, 2020, 06:15:14 pm ---It was only a little bump. Nobody got seriously hurt.

--- End quote ---

Thanking RoGeorge for the links also doesn't hurt.

BTW, they clearly show that you didn't go through "every doc on the site".

purpose:
George,
Thanks for the links. tv84 thinks I'm a bellend for forgetting to thank you.... He may have a point.

Inputing cal points for V and I with scpi are not the problem.

:what exactly are you trying to achieve

What I would like to do is input cal points for the sense function.
I currently have just the one at 42V.
The only mention of sense I have found is :CALibration:SENSE . I need to find out what comes after that to set the points. No luck.

:why you don't like the results, why do you think they are wrong

The sense function is useless when I use it. i.e. when charging a battery, I have to increase the voltage to make up for the sense being inaccurate.

:what you did/got so far, explained with screen captures and/or other performed measurements

I've got a headache. I'll get some time away from the machine and come back with a clear head.

Cheers.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod