Products > Test Equipment
Logic analyzer TLA5202 vs USB analyzers (probe density, features, speed)
<< < (4/6) > >>
nctnico:

--- Quote from: RomDump on April 23, 2023, 01:00:28 am ---
--- Quote from: newtekuser on March 08, 2023, 03:16:33 pm ---The TLA software has an option to import 'support packs' but doesn't provide any.
Since I can't find them on the web I assume they can be purchased from Tektronix for a truckload of money or stuck writing your own but I don't even see an SDK so probably not even possible without reverse engineering.
I would like to be proven wrong.

(there is a 3rd party SPI decoder for the TLA600 though)

--- End quote ---

The official Tektronix SPI and I2C support packs are in the file section of Groups.IO Forum.

--- End quote ---
Do you have specific links to the files? I'm not aware that Tektronix ever had official support packs for SPI and I2C.
RomDump:

--- Quote from: nctnico on April 23, 2023, 08:52:05 am ---Do you have specific links to the files? I'm not aware that Tektronix ever had official support packs for SPI and I2C.

--- End quote ---
Link. You need to register first.
They were listed on Tektronix Support Pack Spreadsheet.
coppice:
If you attach 32 logic analyser probes to a system for anything other than monitoring the 32 bit values on a 32 bit bus, you really need to rethink your approach. There aren't many places where we see a simple parallel 32 bit bus outside a die these days. That's why a 1970s logic analyser tended to be much wider than a modern one.
nctnico:

--- Quote from: RomDump on April 23, 2023, 01:27:26 pm ---
--- Quote from: nctnico on April 23, 2023, 08:52:05 am ---Do you have specific links to the files? I'm not aware that Tektronix ever had official support packs for SPI and I2C.

--- End quote ---
Link. You need to register first.
They were listed on Tektronix Support Pack Spreadsheet.

--- End quote ---
Thanks!


--- Quote from: coppice on April 23, 2023, 01:33:16 pm ---If you attach 32 logic analyser probes to a system for anything other than monitoring the 32 bit values on a 32 bit bus, you really need to rethink your approach. There aren't many places where we see a simple parallel 32 bit bus outside a die these days. That's why a 1970s logic analyser tended to be much wider than a modern one.

--- End quote ---
Well, the trigger abilities of these logic analysers are far superior compared to anything you'll find on a USB logic analyser or oscilloscope. I'm not using my logic analyser often, but when I do it saves lots of time.
newtekuser:

--- Quote from: RomDump on April 23, 2023, 01:27:26 pm ---
--- Quote from: nctnico on April 23, 2023, 08:52:05 am ---Do you have specific links to the files? I'm not aware that Tektronix ever had official support packs for SPI and I2C.

--- End quote ---
Link. You need to register first.
They were listed on Tektronix Support Pack Spreadsheet.

--- End quote ---

They only have these support packs for the TLA700 not for the TLA5000 series

Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod